Finding your suitable readers for 2.5. hp outboard motor is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 2.5. hp outboard motor including detail information and customer reviews. Let’s find out which is your favorite one.
658 reviews analysed
1. Seamander Outboard Motor Cover,Full Motor Outboard Cover, Engines Cover Waterproof Boat Cover
Feature
- Made of Marine grade heavy-duty, waterproof polyester.
- Covers the whole motor from top to prop with the measurement of: Circumference: Up to 57 Inches Width x Height Up to 47 Inches
- Prevent fading and creaking on motor from exposure to SUN, RAIN, WIND, etc
- Drawstring & zipper provides secure snug fit.Reinforced Top-stitched seams.
- One year factory limited warranty
- Note: Please check measurements before purchase
Description
These strong motor covers are made of Marine Grade Polyester .Seamander Motor Covers by Wake offers all purpose, easy slip-on motor covers that will keep your outboard motor looking great and protected against harmful environmental conditions. Keep your new outboard motor looking good and protect it against harmful environmental conditions. Our motor covers have been redesigned to better fit all makes of outboard engines. Simply measure your outboard motor and determine those dimensions that most closely match your particular model.
2. Ironwood Pacific EasyTroller Trolling Plate
Feature
- Slow your boat to the ideal trolling speed
- patented spring hinge design flexes upward to prevent damage to the trolling plate under accidental acceleration
- The optional hydrofoil trolling plate model combines two products into one to improve handling, fuel economy, and performance
- Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller
- Small model fits outboard motors, while Standard model fits both outboard and I/O
- Make offshore fishing for walleye or lake trout a snap without the need for a trolling motor
- troll speed as low as 1 MPH
- Made in USA
- one-year manufacturer warranty
3. Seamander Outboard Motor Cover 10-200 HP Engines Cover Waterproof Boat Cover
Feature
- Waterproof Oxford fabric, breathable and durable.
- Drawstring closure on bottom hem cinch the cover tightly to the motor.
- Cover motor cowling and motor to protect against sun and weather damage.
- Perfect for boats that require separate outboard motor protection.
- 4 different sizes are available, Fits Up to 10 HP,Fits 20 to 40 HP,Fits 50 to 100 HP Fits 110 to 200 HP
Description
These strong motor covers are made of Marine Grade Polyester .Seamander Motor Covers by Wake offers all purpose, easy slip-on motor covers that will keep your outboard motor looking great and protected against harmful environmental conditions. Keep your new outboard motor looking good and protect it against harmful environmental conditions. Our motor covers have been redesigned to better fit all makes of outboard engines. Simply measure your outboard motor and determine those dimensions that most closely match your particular model.
4. Full Outboard Motor Cover, Boat Engine Cover, Waterproof, Heavy Duty, Black
Feature
- Made of 210D marine grade polyester canvas with silver coating.
- Designed for protecting your motors from rain,water,dust,UV rays damage.
- Drawstring & zipper provides secure snug fit. Reinforced Top-stitched seams.
- Covers the whole motor from top to prop with the measurement of: CIRCUMFERENCE: from 47 Inches to 85 Inches, Height from 37 Inches to 72 Inches.
- Note: This cover is only for storage use when motor is not running. Please check measurements and according to the size chart (last picture) before purchase.
Description
Boat Outboard Motor Cover Size Chart:
40 – 50HP: C1- 65″ / C2 – 70″ / H – 56″
60 – 90HP: C1- 71″ / C2 – 76″ / H – 64″
100 – 150HP: C1- 81″ / C2 – 85″ / H – 70″
Please check measurements and according to the size chart (last picture) before purchase.
Color:
Black
5. Heavy Duty Outboard Motor Cover 600D Waterproof Boat Motor Hood Cover Upgraded Rainproof UV Resistant with Thick Polyester Fabric
Feature
- Made of 600D upgraded marine grade woven polyester fabric with PU coating. Dimensions: 28.7″ L x 18.1″ W x 27″ H
- New designed, waterproof, rainproof, dust.
- Protective Engine motor. Drawstring ensures a smooth snug fit. Won’t shrink or stretc.
- Excellent for Trailering and Storage. To protect the hull surface by external sharp objects to wipe.
- 3 Year limited warranty.
Description
Feature:
Resistant to mildew and UV damage.
Designed and tailored to fit specific Outboard Motors Models to give a secure close fit.
Polyester canvas with an advanced coating technology assures maximum water resistance, UV protection & Rainproof.
Installation is simple, easy to carry.
Noted:
Please kindly undertsand that slight color difference may exsit due to photographing condition.Not affect to use!
Please measure the size of your motor cover carefully before purchasing. If you’re not sure with your size, please contact with the customer service at any time.
Size:
25-50HP : 23″ L x 16″ W x 17″ H
50-115HP: 24″ L x 18″ W x 23″ H
115-225HP: 28.7″ L x 18.1″ W x 27″ H
Warranty
We offer 3 Years Warranty, please be assured place orders. We try our best to offer nice products and service.
6. Full Outboard Motor Cover, Boat Engine Cover, 5-150HP, Waterproof, Heavy Duty, Gray
Feature
- Made of 210D marine grade polyester canvas with silver coating.
- Designed for protecting your motors from rain,water,dust,UV rays damage.
- Drawstring & zipper provides secure snug fit. Reinforced Top-stitched seams.
- Covers the whole motor from top to prop with the measurement of: CIRCUMFERENCE: from 47 Inches to 85 Inches, Height from 37 Inches to 72 Inches.
- Note: This cover is only for storage use when motor is not running. Please check measurements and according to the size chart (last picture) before purchase.
Description
Boat Outboard Motor Cover Size Chart:
Up – 5HP: C1- 44″ / C2 – 47″ / H – 37″
8 – 10HP: C1- 49″ / C2 – 53″ / H – 41″
15 – 20HP: C1- 53″ / C2 – 57″ / H – 47″
25 – 30HP: C1- 59″ / C2 – 63″ / H – 51″
40 – 50HP: C1- 65″ / C2 – 70″ / H – 56″
60 – 90HP: C1- 71″ / C2 – 76″ / H – 64″
100 – 150HP: C1- 81″ / C2 – 85″ / H – 70″
Please check measurements and according to the size chart (last picture) before purchase.
7. COCO Outboard Motor Cover Waterproof Boat Motor Cover up to (25-50HP, 50-115 HP,115-225 HP) Mildew Resistant, and UV Resistant with Thick Polyester Fabric
Feature
- Marine grade woven polyester fabric that won’t shrink or stretc, Polyester canvas with an advanced coating technology assures maximum water resistance, UV protection & breathability.
- Protective motor. Elasticized fastening ensures a smooth snug fit.
- Designed and tailored to fit specific Outboard Motors Models to give a secure close fit.
- Excellent for Trailering and Storage. To protect the hull surface by external sharp objects to wipe
- Noted :The size is 25-50HP.The actual size is larger than the size of the description in order to it can be more suitable for your Boat Engine , but does not affect to use
Description
Boat Engine Cover Size:
25-50: 23″ L x 16″ W x 17″ H
50-115: 24″ L x 18″ W x 23″ H
115-225: 28.7″ L x 18.1″ W x 27″ H
Product Description:
Deluxe Outboard Motor Cover Keeps Your Motor Clean, Dry, and Looking Like New
Drawstring Cord Hem for a Quick Custom Fit
Water, Mildew, and UV Resistant
Double needle line, sturdy and durable.
PU coating, seamless heat sealing, effectively achieve the waterproof, dustproof, prevent bask in,
The bottom confining elastic design, cover set up more solid.
Installation is simple, easy to carry.
that offer years of outdoor use.
8. Attwood Outboard Motor Hydro-Stabilizer 9401-7
Feature
- For use on outboards under 50 horsepower
- Designed from engineered molded resins, the Hydro-Stabilizer helps to get up on plane, reduces ventilation / cavitation and poor handling
- The Hydro-Stabilizer out-performs ordinary flat hydrofoils by reducing drag when the hull goes on plane.
- Improves getting skiers and wakeboarders up easier and faster
- Improve planing performance and stability
Description
Hydro-stabilizer 9401-7 gives outboards and sterndrives a performance boost, improving both stability and handling. The hydro-stabilizer out-performs ordinary flat hydrofoils by reducing drag when the hull goes on Plane. Wings constructed of engineered Resin. The hydro-stabilizer quickly puts the boat on Plane and helps pull skiers out of the hole faster. Even at lower RPMs, it keeps the boat on Plane. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.
9. Boat Motor 5x Washer 90430-08020 Seal Seals Gasket Yamaha Parsun Outboard F 2.5 – 25HP F4-03000024 Jet-ski Motorcycle Diesel Snow Mobile 2/4 stroke Engine
Conclusion
By our suggestions above, we hope that you can found 25 Hp Outboard Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!
