Top 10 75 Hp Boat Motor
Finding your suitable readers for 7.5 hp boat motor is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 7.5 hp boat motor including detail information and customer reviews. Let’s find out which is your favorite one.
891 reviews analysed
1. MARINE CITY Heavy Duty Aluminum Outboard 2-Stroke Motor Bracket (7.5 HP to 20 HP)-MC79511023
- Overall is made of Aluminum, Base is made of Plastic. Hp rating: 7-1/2 to 20, Broad Size: 8-1/4” × 10-3/8”, Mounting Size: 5-1/4” × 9”, maximum weight is 52kg (115lbs).
- Retractable bracket easy to drive and auxiliary motor on sailing, with reinforced welded frame and stamping stainless steel parts.
- Spring loaded (5 vertical position) adjustable bracket, Wide track body for added stability.
- Solid Polypropylene Mounting board. Easy to lift-heavy spring helps balance motor weight.
- Perfect for small to medium sized powerboats and yachts.
Marine City Heavy Duty Aluminum Outboard 2-Stroke Motor Bracket (7.5 HP to 20 HP). Overall is made of Aluminum, Base is made of Plastic. Hp rating: 7-1/2 to 20, Broad Size: 8-1/4” × 10-3/8”, Mounting Size: 5-1/4” × 9”, maximum weight is 52 kg (115 lbs). Retractable bracket easy to drive and auxiliary motor on sailing, with reinforced welded frame and stamping stainless steel parts. Spring loaded (5 vertical position) adjustable bracket, Wide track body for added stability.
2. UANOFCN Water Pump Repair kit for Mercury 4 7.5 9.8HP with 0.456 ID 47-89981Q1 47-89981T1
- Shipped from USA, guaranteed timeliness, safe and convenient
- The impeller kit replaces part numbers 47-89981T1 and 47-89981Q1,Impeller kit for Mercury 4, 4.5, 7.5 and 9.8 hp
- The kit includes the impeller, wear plate, line up tube and o-rings
- OEM quality Best price good choice for replace part
- Cooperated with local workshops,quality is guaranteed.
3. Ironwood Pacific HelmsMate Tiller Extension SE
- Straight extendable model; 36”-50” length
- Full steering and throttle control while sitting away from the motor
- Fits gas and electric trolling motors 15HP and under; designed for trolling speeds only
- Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last
- Made in USA with a lifetime warranty
The HelmsMate Tiller Extension Handle allows you to sit away from your motor while maintaining full steering and throttle control. Slides directly onto the tiller handle of gas and electric trolling motors. Designed for trolling speeds only.
- Clamps directly to the tiller handle for full steering and throttle control
- Fits most gas and electric trolling motors up to 15 HP
- Extendable models incorporate a stainless snap button to withstand the twisting motion from shift and throttle control
- Anodized aluminum tube, marine grade hardware, unbreakable nylon clamp
- Made in USA. Lifetime warranty
Instructions for Use
Loosen thumb screws on the HelmsMate clamp, slide onto your tiller handle and tighten the thumb screws. For larger diameter tiller handles remove the rubber sleeve, pull open the clamp at the flanges and slide onto the tiller handle. For smaller tiller handles request the extra rubber sleeve that is available. Once clamped to your motor check to make sure you have clear access to the kill button on the motor.
For extendable models, adjust the length by pressing the snap button and sliding the inner handle to the desired length.
4. Full Power Plus 4/4.5/6/7.5/9.8 HP Impeller Replacement for Mercury Mariner Mercruiser Mallory 18-3039 47-89981
Fits the following Mercury engines:
Horsepower Model Serial Range
- 4hp 4 5595532 and up
- 4.5hp 45 4107220 – 5595531
- 4.5hp 45 5595532 and up
- 6hp 60 1916139 – 2193817
- 6hp 60 2193818 – 2529894
- 6hp 60J 2385673 – 2387383
- 7.5hp 75 2529895 – 4131609
- 7.5hp 75 4131610 – 5226934
- 7.5hp 7.5 5206550 and up
- 9.8hp 110 1865779 – 2196388
- 9.8hp 110 2196389 – 3795657
- 9.8hp 110 3795658 – 4126459
- 9.8hp 110 4126460 – 5206549
- 9.8hp 9.8 5206550 and up
5. Fasco D703 5.6" Frame Open Ventilated Permanent Split Capacitor Direct Drive Blower Motor with Sleeve Bearing, 1/2-1/3-1/4HP, 1075rpm, 208-230V, 60Hz, 4-2.7-2 amps
- Thermally protected
- UL recognized
- CSA or ULc certified
- Reversible rotation
- Direct drive blower motors with sleeve bearings
- Shaft measures 1/2″ diameter by 6″ length
- 208-230 Volts, 1075 RPM, 4.0-2.7-2.0 Amps, 1/2-1/3-1/4 HP
- Sleeve Bearing, 3 Speed, Reversing Plug, Permanent Split Capacitor (PSC), Open Ventilation, Air Over, Thermally Protected, 1.4 Load Factor, Motor Length: 5-Inch, Motor Diameter: 5 5/8-Inch, Shaft Dimension: 1/2 by 6-Inch
- Requires a 7.5 MFD 370V Capacitor – Part # 7.5H
- 1 Year Manufacturer Warranty
- Genuine Fasco Product
Thermally protected. UL recognized; CSA or ULc certified. Reversible rotation. Direct drive blower motors with sleeve bearings. All angle mount bearings. Use rainshield when necessary. 7.5M 370V Capacitor. Electrically reversible. 1/2-1/3-1/4 Horsepower. 1075rpm. 3 Speed. 208-230 volts. 60Hz Frequency. 4-2.7-2 amps. Shaft measures 1/2″ diameter by 6″ length.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry’s most respected line of AC motors and blowers. Fasco D703 is a 1/2-1/3-1/4 HP 208-230 Volt 1075 RPM 5 5/8-Inch Direct Drive Blower Motor.
6. 47-89981 Impeller for Mercury 4.0 4.5 7.5 and Merc 110 9.8hp Boat Motors 47-39074
7. Marine Dynamics Hydro Tail Junior Stingray, Black
8. SeaSense Chrysler/Force Connector, Female
The SeaSense female fuel line connector has a 3/8″ barb, and comes in chrome brass. Built to OEM specifications for replacement parts. Proper fuel connections are essential in getting the most out of your engine.
9. Water Pump Impeller Repair Kit for Johnson Evinrude 5.5 6 7.5 Hp 1952-1978 (Read Product Description for Exact Application) Replaces 18-3202 277181
Impeller and Plate Kit for Johnson & Evinrude
EMP Part # 46-02479
New in package, water pump repair kit for Johnson and Evinrude 5.5, 6, 7.5 hp outboard motor water pumps with metal pump housing as detailed in the application chart below.
Water Pump Impeller (Replaces OEM Part #: 277181, 434424)
Impeller Wear Plate (Replaces OEM Part #: 305303)
Water Tube Grommet (Replaces OEM Part #: 302497)
Replaces Part Number:
Sierra 18-3202, 18-3377
5.5 Hp1954 – 1964
6 Hp1952 – 1978
7.5 Hp1954 – 1958
10. SouthMarine Aluminum Alloy Propeller 7 1/2×8-BA for Yamaha 4hp 5hp 6hp 4A 4M 5M 5C F4 F6L F6S F5A F6C Outboard Motors 6E0-45941-01-00 7.5×8
By our suggestions above, we hope that you can found 75 Hp Boat Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!