Top 10 15 Hp Phase Convertef

※FEATURES OF 3 PHASE MOTOR Compared with 1 Phase Motor ■ Low failure rate ■ Small size ■ High efficiency ■ Affordable price NOTICES ■ This product shall be used only for 3 phase 220V motor. ■ Use only a motor which suits the capacity range of this product. (1:1) ■ If the motor overheats, check whether the current is correct as shown on the motor nameplate. (Within 85% of rated) ■ Only DPS check the voltage is the output voltage 2 phase and the output voltage 3 phase when the only motors movable ■ If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating. (This may cause motor failure.) ■ Motor brake must be of single phase only (A brake for 3 phase does not work). ■ For control cables, use U.W cable only (Electromagnetic switches, brake, magnet, etc.) SPECIFICATIONS APPLICATION RANGE : 3 phase 220V motor type RATED VOLTAGE : 3 phase 220V ± 10% HOW TO CONVERT : Relay control circuit for three-phase driving AMBIENT TEMPERATURE : -10 ~ 50℃ AMBIENT HUMIDITY : Within 95% ENCLOSURE : Open type (IP54) INSULATION RESISTANCE : 100MΩ or higher based on 500VDC MEGA WITHSTANDING VOLTAGE : For 1 minute at 1500VAC 50/ 60Hz between power supply terminal and external terminal : POWER CONSUMPTION : Within 85% of motor rated current APPLICATIONS ■ All products driven by 3 phase motors ■ All motors for industrial and domestic purpose ■ Hoists ■ Compressors ■ Conveyor motors ■ Agitators ■ Food processing machines ■ Hydraulic motors ■ Cutters, etc. ※These products can be connected for use quickly and easily everywhere.

※FEATURES OF 3 PHASE MOTOR Compared with 1 Phase Motor ■ Low failure rate ■ Small size ■ High efficiency ■ Affordable price NOTICES ■ This product shall be used only for 3 phase 220V motor. ■ Use only a motor which suits the capacity range of this product. (1:1) ■ If the motor overheats, check whether the current is correct as shown on the motor nameplate. (Within 85% of rated) ■ Only DPS check the voltage is the output voltage 2 phase and the output voltage 3 phase when the only motors movable ■ If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating. (This may cause motor failure.) ■ Motor brake must be of single phase only (A brake for 3 phase does not work). ■ For control cables, use U.W cable only (Electromagnetic switches, brake, magnet, etc.) SPECIFICATIONS APPLICATION RANGE : 3 phase 220V motor type RATED VOLTAGE : 3 phase 220V ± 10% HOW TO CONVERT : Relay control circuit for three-phase driving AMBIENT TEMPERATURE : -10 ~ 50℃ AMBIENT HUMIDITY : Within 95% ENCLOSURE : Open type (IP54) INSULATION RESISTANCE : 100MΩ or higher based on 500VDC MEGA WITHSTANDING VOLTAGE : For 1 minute at 1500VAC 50/ 60Hz between power supply terminal and external terminal : POWER CONSUMPTION : Within 85% of motor rated current APPLICATIONS ■ All products driven by 3 phase motors ■ All motors for industrial and domestic purpose ■ Hoists ■ Compressors ■ Conveyor motors ■ Agitators ■ Food processing machines ■ Hydraulic motors ■ Cutters, etc. ※These products can be connected for use quickly and easily everywhere.

Specification:

Basics

Model:GK3000-2S0075G

Capacity:10 hp (7.5 kW)

Shipping weight:18 kg

Dimension:423*258*230 mm

Rated current：34 A

Over load capacity：150% of rated current for 1 minute, 180% of rated current for 3 seconds

Control Feature

Control mode:V/F control; Sensorless vector control;

Communication:RS485

Speed regulation:1:100

Start torque:150% of rating torque at 1 Hz

Speed control accuracy:≤±0.5% of rating synchronous speed

Frequency precision:Digital setting: max frequency x± 0.01%;Analog setting: max frequency x± 0.2%

Frequency resolution:Analog setting: 0.1% of max frequency;

Digital setting: 0.01Hz

Torque boost:Automatic torque boost, manual torque boost 0.1%~30.0%

Interior PID controller:Be convenient to make closed-loop system

Automatic energy save running Optimize V/F curve automatically based on the load to realize power save running

Automatic voltage regulation (AVR):Can keep constant output voltage when power source voltage varies.

Automatic current limiting:Limit running current automatically to avoid frequent over-current which will cause trip

Enclosure rating:IP 20

‘ Phase Converter, Static, Input Voltage 208-242, Output Voltage 208-242, Input Phase AC 1, Output Phase AC 3, Input (Amps) 15, Output Amps 9.6, Output HP 1-3, Depth (In.) 2-5/8, Width (In.) 5-1/8, Height (In.) 9-1/2, HP Range 1 to 3, Knockout Size (In.) 1/2, Motor Load Rating 2/3 ‘

Specification:

Basics

Model:GK3000-1S0007

Capacity:1 hp (0.75 kW)

Shipping weight:1.2 kg Dimension:124.8*78*148.4 mm

Rated current:7 A

Over load capacity:150% of rated current for 60s, 180% of rated current for 10s, 200% of rated current for 3s

Control Features

Control mode:V/f control

Operation command mode:Keypad control, Terminal control, Serial communication control

Frequency setting mode:Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes.

Starting torque:1 Hz/150% Speed adjustment range:1:50

Carrier frequency:1.0-16.0kHz, automatically adjusted according to temperature and load characteristics

Frequency accuracy:Digital setting: 0.01Hz

Analog setting: Maximum frequency * 0.05%

Torque boost:Automatically torque boost; manually torque boost: 0.1%~30.0%

V/f curve:Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)

Acceleration/deceleration mode:Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s

DC braking:DC braking when starting and stopping

DC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~100.0s

Jog operation:Jog operation frequency: 0.0Hz~maximum frequency

Jog acceleration/deceleration time: 0.1s~3600.0s

Simple PLC & multi-step speed operation

Built-in PID & Automatic voltage regulation

Please reference the following specifications to above pictures and instructions

Control Function

Input/output terminals

Environment

ELC Series of step up/down voltage transformers offers you a safe, reliable, affordable & convenient solution to converting voltages from 110-120 volt up to 220-240 volt or from 220-240 volt down to 110-120 volt for both home use & industrial applications. The t-5000+ is rated at 3, 000 watts maximum. It features a heavy-duty cord with a standard US 3-prong plug. There are a total of three outputs on the front panel. Two are grounded 110V outputs designated for 120 Volts with a us standard outlet and the 220 volt only universal Outlet which accepts plugs from most countries. For safety, it’s recommended by the manufacturer that the voltage transformer’s maximum power should be equal or greater than the power rating of your appliance multiplied by 1.5. For example, if you have an appliance rated at 100 watts, you will need to pick a transformer with a maximum power of 150 watts or greater. The ELC T Series also features circuit breakers which protect the equipment and the transformer against overload. With circuit breaker protection You’ll never need to replace fuses.

ELC series of step up/down voltage transformers offers you a safe, reliable, affordable & convenient solution to converting voltages from 110-120 volt up to 220-240 volt or from 220-240 volt down to 110-120 volt for both home use & industrial applications. The T-3000 is rated at 3,000 watts maximum. It features a heavy-duty cord with a standard US 3-prong plug. There are a total of three outputs on the front panel. Two are grounded 110V outputs designated for 120 volts with a US standard outlet and the 220 volt only universal outlet which accepts plugs from most countries. For safety, it’s recommended by the manufacturer that the voltage transformer’s maximum power should be equal or greater than the power rating of your appliance multiplied by 1.5. For example, if you have an appliance rated at 100 watts, you will need to pick a transformer with a maximum power of 150 watts or greater. The ELC T series also features circuit breakers which protect the equipment and the transformer against overload. With circuit breaker protection you’ll never need to replace fuses.

※FEATURES OF 3 PHASE MOTOR Compared with 1 Phase Motor ■ Low failure rate ■ Small size ■ High efficiency ■ Affordable price NOTICES ■ This product shall be used only for 3 phase 220V motor. ■ Use only a motor which suits the capacity range of this product. (1:1) ■ If the motor overheats, check whether the current is correct as shown on the motor nameplate. (Within 85% of rated) ■ Only DPS check the voltage is the output voltage 2 phase and the output voltage 3 phase when the only motors movable ■ If you use a motor for a large load condition, use the D.P.S product with one rating higher. Do not use it with higher than one rating. (This may cause motor failure.) ■ Motor brake must be of single phase only (A brake for 3 phase does not work). ■ For control cables, use U.W cable only (Electromagnetic switches, brake, magnet, etc.) SPECIFICATIONS APPLICATION RANGE : 3 phase 220V motor type RATED VOLTAGE : 3 phase 220V ± 10% HOW TO CONVERT : Relay control circuit for three-phase driving AMBIENT TEMPERATURE : -10 ~ 50℃ AMBIENT HUMIDITY : Within 95% ENCLOSURE : Open type (IP54) INSULATION RESISTANCE : 100MΩ or higher based on 500VDC MEGA WITHSTANDING VOLTAGE : For 1 minute at 1500VAC 50/ 60Hz between power supply terminal and external terminal : POWER CONSUMPTION : Within 85% of motor rated current APPLICATIONS ■ All products driven by 3 phase motors ■ All motors for industrial and domestic purpose ■ Hoists ■ Compressors ■ Conveyor motors ■ Agitators ■ Food processing machines ■ Hydraulic motors ■ Cutters, etc. ※These products can be connected for use quickly and easily everywhere.

These rotary phase converters allow you to operate 3-phase machinery from a single-phase power source at 100% power and 95% efficiency. Each model operates up to twice its nameplate rating in mixed-motor load. For heavily-loaded or hard-start machinery such as gearhead lathes compressors or dust collectors choose a nameplate rating 3 times the HP of the most heavily loaded motor. See our individual 3-phase machine pages for specific phase converter recommendations. For application assistance please call our technical support group at 546-9663. Features: * Cool and quiet operation * Operates 3-phase motors at full power * 95% electrical efficiency * Drip-proof cast iron casing * Single or multiple loads * Identical input/output voltages * 15 HP * “Stackable” for higher HP requirements * Step-by-step instructions * Specifications: * Name Plate: 15 HP * Starting Capacity: 12 HP * Weight: 300-Pound.