Finding your suitable readers for quiet brushless blower exaust cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for quiet brushless blower exaust cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
764 reviews analysed
1. UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
Description
BASICAL INFORMATION
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
ELECTRICAL PROTECTION
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
2. GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
Feature
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
3. 3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)
Feature
- ❃❃ Power Connection: 2 Pin-ph2.5
- ❃❃ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 24V, 0.06A.
4. ANVISION 2-Pack 40mm x 10mm DC 5V USB Brushless Cooling Fan, Dual Ball Bearing, YDM4010B05
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Rated Voltage: 5V DC
Operating Voltage Range: 4.5-5.5V DC
Start-up Voltage: 3.5V DC
Rated Current: 0.08A (0.20A Max.)
Rated Power: 0.40W (1.0W Max.)
Rated Speed: 6000PRM
Air Flow: 7.32CFM
Air Pressure: 2.98mmH2O
*Noise Level: 26.26dB(A)
Conform to RoHS: Yes
Safety Approvals: CE cUL UL
Life Expectancy: 50000H at 25degree test
Net Weight: 18.7g
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
5. Antrader 12V DC Dual Ball Bearing Brushless Radial Blower Cooling Fan 50x50x15mm for DIY 3D Printer Extruder Humidifier 2" x 2" x 0.55" Pack of 3
Feature
- High quality mini brushless 5015 DC 12V fan, sleeve-bearing design cooling cooler.
- Plastic construction fan. Dual Ball Bearing
- Speed: 6000 RPM
- Air Flow : 3.87 CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A
- 50 x 50 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 50mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
Description
The Best Product to Save Your Time and Money!
Specifications:
Model: 5015
Name: 12V DC BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5 Rated
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size: 50x50x15mm/ 2″ x 2″ x 0.55″
Weight: 78g
Package Content:
3pcs x DC Brushless Cooling Fan
Note:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
QUALITY GUARANTEE: If there is any quality problem, please feel free to contact us. Refund or Replacement for any quality problem.
6. AC Infinity AXIAL 1225, Quiet Muffin Fan, 120V AC 120mm x 25mm Low Speed, for DIY Cooling Ventilation Exhaust Projects
Description
Product Description
The heavy duty axial fan kit is designed for custom projects and as a replacement fan. The fan runs on 100 to 125V AC and contains everything needed to easily mount the fan and power it through a wall outlet. Includes a 4 foot power cord that can be easily attached to the fan’s metal terminals and allows it to be powered through a wall outlet. The plug cord can also be cut and be converted into lead wires to be connected to a wired AC power source. Also includes two 120 millimeter metal fan guards and a mounting screw set. AC Infinity fans are certified by CE, UL, TUV, and RoHS.
Heavy Duty Construction
The fan’s housing is constructed of die-cast aluminum painted black and able to perform well in harsh environments and withstand shocks. Its impeller and blades are molded with thermoplastic and meets UL 94 standards for resistance to flammability. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Containing long life dual ball bearings, the fans can be run continuously for 67,000 hours and be mounted in any direction.
Applications
This low speed fan is suitable in applications that requires a lower noise level and can accept a weaker airflow. Popular uses include theater cabinets, woodstove heaters, room to room doorways, amplifiers, kegerators, and more. Because this is a standard industrial size fan, it can be used to replace fans found in various electronics and machinery.
7. Comidox 5Pcs Black Brushless DC Cooling Blower Fan 5015S 5V 0.1-0.3A 50x15mm
Description
description
1. Ultra quiet MID speed brushless DC Blower
2. Housing Material is thermoplastic UL PBT
3. Life Expectancy at 40 Celsius degree: 40000 hours
4. Rating: DC 5V / 0.1-0.3A
5. Operating Temperature: -10 Celsius degree to +60 Celsius degree
Blade Material is thermoplastic UL94V-0 PBT
Package including:5PCS
8. ELUTENG 40mm USB Fan with 3 Speed Control USB Ventilator 5V Max 5300RPM High Flow VR Cooling Fan Compatible for Receiver DVR Playstation Xbox Computer Cabinet Cooling
Feature
- ❤ Mini Cooling Fan: ELUTENG 40mm mini USB cooling fan with 3-speed control, size and super lightweight design, perfect fit for DIY cooling and narrow place.
- ❤ 3 Speed Control: Voltage: 3.5/4.2/5V
- Air volume: 3.5/3.88/4.4 CFM, different speed level for different cooling needs.***NOTE: Input power: Max 5V/1A. excess may damage the motor
- ❤ Widely Used: Suitable for ventilation of VR glasses /TV box /Raspberry pie /Router /Small PC Case and other small electronic equipment ventilation.
- ❤ High Quality: Metal grill on front side, protect cable and your hands
- High quality bearings, durable
- 100cm/3.3ft USB cable , meet connection needs.Please confirm the size by pics before purchasing.
- ❤ USB Powered: 5V powered, allow you to use it in any places with USB power supply, convenient,perfect for Home/Office/Business trip.
9. Delta BreezSmart SMT130 130 CFM Exhaust Bath Fan
Feature
- Virtually silent at less than 0.3 sones
- An indicator light underneath the grille assures you that this quiet fan is running
- ENERGY STAR Most Efficient for efficient cost-saving operation
- Precision engineered with DC brushless motor for extended reliability, this fan will outlast many household appliances
- Galvanized steel construction resists corrosion, equipped with metal duct adapter
Description
Product Description
The Delta BreezSmart SMT130 marks a new achievement in ventilation for green construction with powerful performance at very low noise and low power consumption. Air flow of 130 CFM with loudness rating at less than 0.3 sones. Power consumption of 11.6 Watts with energy efficiency rating of 11.2 CFM per Watt. Features a DC brushless fan motor for extended reliability. ENERGY STAR qualified and HVI certified.
From the Manufacturer
The Breez Ventilation Fan combines several design innovations, including a switching power supply and DC brushless motor to provide a quieter solution with energy savings up to 74% compared to similar products. The Breez Ventilation Fan is easy to install
10. SAILFLO 4 inch Inline Duct Booster Fan 110V 12W 76CFM Energy Saving Efficient Exhaust Vent Blower for Home grow tent Shop mall office basement attic etc.(4"/100mm)
Feature
- Widely Used — The 4″ inline duct fan is widely used in homes, offices, warehouses, restaurants, bars, shops, shopping malls, grow tents, greenhouses and other places where a lot of air is needed.
- Large Airflow — It is designed with high quality sleeve motor, quiet and service life more than 3 years, with rotational speed 2400 r/min, 76 CFM large airflow.
- Over-heat Protection >
- >
- The motor comes with low operating temperature and low heat generation, the built-in temperature protection device, the contact point is disconnected when the motor overheats, which acts as a power failure protection. double protection is safer.
- DIY Your HVAC System >
- >
- You can supply fresh air with one or more fans to DIY air circulation systems depending on the size of your space.
- Easy to install >
- >
- only connect it with 4″ ventilation pipe, 39″ cable (with no plug), brown live wire, blue neutral wire, easy to install, please fix the fan to avoid noise due to looseness.
Conclusion
By our suggestions above, we hope that you can found Quiet Brushless Blower Exaust Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
