Finding your suitable readers for headphone amplifier desktop is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for headphone amplifier desktop including detail information and customer reviews. Let’s find out which is your favorite one.
893 reviews analysed
1. Fosi Audio Q4 – Mini Stereo DAC & Headphone Amplifier, 24-Bit/192 KHz USB/Optical/Coaxial to RCA AUX, Digital-to-Analog Audio Converter Adapter for Home/Desktop Powered/Active Speakers – Black
Feature
- Easy to set up, no special software, app, or driver to install, a true plug-and-play digital audio adapter
- With USB, optical and coaxial S/PDIF inputs can fit with most home audio system, and RCA output can be connected to amplifier or powered speakers on your desktop
- Built-in Hi-Fi headphone amp chip can drive most 16ohm to 200ohm headphones
- 160mW RMS(32 ohms, 20 Hz – 20 KHz, 0.01% THD), with bass and treble control can be used as preamp or volume controller for your PC/MAC/Computer
- Mini Compact D/A converter, stream bit-perfect 24bit/192KHz HD with low jitter, with output protect circuit, safe for your expensive audio system
- Come with USB charging cable, optical cable, USB type B cable and 18-month warranty
- Full metallic shell to ensure high quality
2. FiiO E10K USB DAC and Headphone Amplifier (Black)
Feature
- DAC Chip¡ªThe Internal DAC chip is a PCM102 and can handle PCM files up to 24-bit/96 kHz while improving audio quality via a linear filter, reduced delay and internal silence on changing tracks, and no phase shifts.
- LOW NOISE FLOOR ¡ª The unit has an optimized low-pass filter and selectable bass boost circuit that are designed for a low noise floor in all states.
- CONNECTION VARIETY ¡ª The variety of connections include a front-panel 1/8¡± headphone jack, a rear-panel 1/8¡± line output, and a rear-panel coaxial digital output, which allows you to send your digital audio to another destination.
- USB CONNECTION ¡ª Connects to your laptop via its micro USB connection, which also provides it with power.
- PORTABLE DESIGN ¡ª A sleek, brushed aluminum shell and chassis allow for durable, portable use.
3. Monolith 124459 Desktop Headphone Amplifier and DAC with THX AAA Technology (Dual AKM 4493 Dacs & Dual AAA-788 Modules)
Feature
- The worlds most linear amp technology: the THX achromatic audio amplifire (THX AAA) ensures the ultimate no-compromise Headphone audio experience
- True balanced operation: Each THX stereo amp module operates in a bridged configuration to maximize output power for each channel, each DAC operates in mono mode
- Dual AKM 4493 DACs: new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a direct stream digital input of 2. 8/5. 6/11. 2 MHz
- Balanced & single ended Headphone output: Compatible with all headphones and items
- Tailor your sound: Use the powerful digital tools to tailor the sound to your personal preference. Does your headphone have a little sibilance? Set a peq to tame that frequency peak
4. Fostex USA Fostex Desktop Headphone Amplifier with DAC Balanced Output (HP-A4BL)
Feature
- Equipped with 4-pin XLR balanced output
- 1/4-inch unbalanced output
- Newly developed audio-grade capacitors
- highly precise crystal with low phase noise
- Playback 24bit/192kHz PCM and 11.2MHz DSD audio
- high performance DAC (Barrbrown PCM1792A)
- Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0
- HI/LO gain selection (10dB) for wider selection of headphones
- digital filter selecting roll-off characteristics and cut-off frequencies
Description
The Fostex HP-A4BL High-Resolution DAC / Balanced Headphone Amp is a high resolution DAC and balanced headphone amplifier well suited for professional audio engineers, mastering engineers, and audiophiles. The HP-A4BL supports PCM audio up to 24-bit/192 kHz and DSD audio up to 11.2 MHz. The front-panel offers a balanced 4-pin XLR headphone output, an unbalanced 1/4″ stereo headphone output, while the rear-panel features stereo RCA outputs, optical S/PDIF I/O, and a USB 2.0 connector. The HP-A4BL has 2 gain staging levels, allowing you to boost the output of the amp by 10 dB without needing to touch the volume knob. The selectable filter allows you to cut-off lower frequencies if desired. Includes power supply, USB cable, and 4 rubber feet. Founded in 1973, Fostex is an acclaimed manufacturer of location sound, multi-track recording, and speaker products.
5. FiiO K5 Pro AK4493EQ | 768K/32Bit and Native DSD 512 decoding Deskstop DAC and Amplifier for Home and Computer(6.35mm (1/4 in.) Headphone Out/RCA line-Out)
Feature
- AK4493 DAC chips for the ultimate in decoding performance, supporting up to 768kHz/32bit and native DSD
- Equipped with XMOS XUF208 USB receiver chip+AKM AK4493 DAC+ Op-amps OPA1642 + flagship TI TPA6120
- Extremely powerful headphone amplification for a total power output of up to 1.5 W under a 32Ω load, and up to 20Vpp at 300Ω
- Multiple interfaces- headphone jacks(6.35mm) /RCA outputs+ USB Coaxial, Optical, and Line-in inputs
- More accurate ADC volume control +Gain and bass switches
6. KGUSS DAC-K3 TPA6120 2.0 Mini HiFi Optical/Coaxial/USB DAC Decoder Audio Headphone Amplifier Headphone Preamp Desktop Amplifier 24BIT 192KHz OPA2134 AMP DC12V US Plug (Black)
Feature
- Unique volume control: When the DAC Headphone Preamp is connected to the speaker and the earphone at the same time, the earphone takes priority. After the earphone is unplugged, it automatically switches to the speaker. The volume button can adjust the RCA output. (The volume button of the decoder on the market can only control the earphone, can not control the RCA. )
- A variety of input and output modes: Headphone Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD
- output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker.
- Chipset: The mini headphone amplifier chip uses CM6642+ CS8416+ CS4398+ TOP6120A2+OPA2134+NE5532P to provide strong guarantee for tone input and output.
- Efficient protection and long life: The headphone audio amp uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, two relay protectors may protect the headphones and speakers.
- Quality Assurance: We are committed to providing customers with satisfactory products and services. We have 2 years of quality assurance. If you have any problems during the purchase and use, please contact us.
7. FX-Audio DAC-X6 Mini HiFi 2.0 Digital Audio Decoder DAC Input USB/Coaxial/Optical Output RCA/Headphone Amplifier 24Bit/96KHz DC12V (Black)
Feature
- Volume control: Unique high and low sound adjustment, can be adjusted according to your preferences,Soft voice and optimize the route.
- A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD
- output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker.
- Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
- Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, two relay protectors may protect the headphones and speakers.
- Quality Assurance: We are committed to providing customers with satisfactory products and services. We have 2 years of quality assurance. If you have any problems during the purchase and use, please contact us.
8. Mackie Mixer Accessory, 1-ch x 4 headphones (HM-4)
Description
The ultra-compact HM-4 4-way headphone amplifier features a 1/4” stereo input and four 1/4″ headphone outputs with individual level controls. Perfect for studios or even at home when up to four people want to listen together.
9. Proster 192kHz/24bit Stereo Audio Amplifier Bluetooth 5.0 Receiver Hi-Fi Digital Power Amplifier DAC Optical Coaxial USB to Analog Audio Converter for Passive Speakers 100W + 100W
Feature
- Built-in professional TPA3116 digital power amplifier chip, support digital to analog signals. Support Bluetooth, optical, coaxial, AUX, USB audio input model switching (Audio Formats: PCM/LPCM, 5.1 channel is incompatible)
- 192Khz HiFi Amplifier is specially designed for customers seeking HiFi sound.Support 192K/24bit sampling rate.
- 100W + 100W output power, 100W RMS X 2 (4 ohm, 20 Hz-20 kHz, 0.04% THD), equipped with 24V power supply, can drive 100 watt (8 ohm), 100 watt (4 ohm) speakers. (For passive speakers only, not for active speakers.)
- Built-in Bluetooth receiver module. Adopt Bluetooth dedicated antenna for stable signal transmission. Adopt the latest Bluetooth version 5.0 lossless transmission technology , supports mobile device Bluetooth connection.
- With IR wireless remote control, support 20~60KHz wide frequency IR remote control, easily adjust volume/ choose input mode/ Mute/ Power ON or OFF. Memory store when power off, support last time working state memory when power off.
Description
Introduction:
This product converts optical, coaxial, and Bluetooth digital audio signals into stereo analog audio signals and supports 192K/24bit HIFI stereo amplification.
Help users solve the problem of connecting different audio interfaces with analog amplifiers, and make the music signal expression more natural, more realistic.
Closer to the source sound quality, providing a perfect music experience for the majority of music enthusiasts.
Specifications:
Audio Formats: PCM/LPCM
Audio Sample Rate: 32~192K
Bluetooth Audio Sample Rate: 32~48K
Bluetooth Version: 5.0 Version
Bluetooth Name: 192Khz HiFi Amplifier
Output power: 100W + 100W
IR remote control: Support 20~60KHz wide frequency IR remote control
Working environment temperature: -10~+55°C
Shell material: Aluminum alloy
Note:
1. Please plug the power cord into the amp then the AC outlet.
2. Please select the corresponding input channel by press button on the amplifier.
3. For passive speakers only, not the powered speakers.
4. When using fiber optical or coaxial as the input source, set the audio format of the input device to PCM.
Setting Path: Device Home Page – System Settings – Image & Sound – Sound Settings – Digital Audio Output – PCM/LPCM
Package:
1 x Bluetooth Audio Amplifier
1 x IR Remote Control
1 x 24V/3A Power supply
1 x AC power cord
1 x User’s Manual
Conclusion
By our suggestions above, we hope that you can found Headphone Amplifier Desktop for you.Please don’t forget to share your experience by comment in this post. Thank you!
