697 reviews analysed
1. Icstation 12V 7W Flexible Polyimide Heater Plate Adhesive PI Heating Film 25mmx50mm (Pack of 4)
Feature
- Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process
- Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance
- Equipped with self adhesive can be fixed on the item surface easily, heating films can not control temperature itself.
- Working Voltage: DC 12V, Power: 7W, Film Size: 25 X 50mm/0.98 X 1.97inch(L*W), Maximum Temperature: about 150℃ Ship out by USPS with tracking information and 7-15 days delivery time usually
2. 4pcs Polyimide Heating Film Insulated 24V 30W PI Heater Plate Adhesive For Heating Components
Description
Product Introduction:
Size:45*100mm
Voltage:24V
Power:30W
Performance Diameter:
Insulation Thermal Conduction Layer: polyimide film
Thickness:<>
Operating Temperature:-190℃~205℃
Lead Wire Tensible Strength:>5N
Gun Adhesive Force:>40N/100mm
Features:
1.Fast Preheating Speed
2.Long Using Life
3.Space Saving
Applications:
1.Scientific Analyse Instrument:such as provide constant temperature source for thermal conductivity tester,medical instrument;stabilizing electronic component operating temperature
2.In deep cold circumstances,letting instrument reach safety operating temperature,such as satellite,spacecraft and airplane etc
3.Vacuum heating and baking
4.Car rearview defroster,antenna or radar defrosting heating components and speed regulation resistor
5.Medical treatment and beauty equipment
3. Element Film Heater, Heating Film Heater Heated Heater Membrane Tape 10mmx93mm 12V 12W PI Polyimide Accessories
Description
HOPE DONGKER MAKES YOUR LIFE EASIER!
Product Introduction:
1.Specification:10mmx93mm
2.Voltage:12V
3.Power:12W
Product Description:
Polyimide film PI electric film is a polyimide film as an external insulator, metal foil, wire for the conductive heat, the high temperature and heat from the heat. The polyimide electric film has excellent dielectric strength, excellent electrical strength, excellent heat transfer efficiency, excellent resistance stability, and is widely used in the field of electric heating.
Features: soft and good performance, can be bent, warm up fast, long service life.
Applications:
1. Scientific analysis equipment, such as: for the thermal conductivity (or thermal coefficient) measuring instrument to provide constant temperature source, medical equipment, stable photoelectronic components operating temperature.
2. In the cold environment, so that equipment and equipment to achieve safe working temperature. For example: artificial satellites, space vehicles and aircraft and other equipment and equipment used in high latitudes, low temperature control, such as card readers, LCD monitors and other instruments.
3. Vacuum heating and baking areas.
4. Auto oil pan heating, rearview mirror deodorant, antenna or radar snow removal, defrosting heating elements.
5. Health care and beauty equipment industry.
4. El Tape 1 Meter El Strip with 12-Volt DC Inverter – Blue/Green
Description
EL strip is the latest high-tech products, which is of the thinnest, flexible, low power consumption, no heat, even brightness, color and so on. This product has been widely used in the automotive industry, for instance: the car dashboard,etc. EL stip is widely used, can also be used in car interiors, car signs, car stickers, car signs, advertisement, cartoon icons, After configuring the inverter the product will be more attractive, and to make your car more beautiful. Welcome inquiry for large orders, the price can be more favorable. Thank you
5. Icstation 12V 7W Flexible Polyimide Heater Plate Adhesive PI Heating Film 25mmx50mm (Pack of 2)
Feature
- Heating film uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process
- Heater plate is extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance
- Equipped with self adhesive can be fixed on the item surface easily
- Working Voltage: DC 12V, Amps: 0.5A, Power:7W, Film Size:50 X 25mm/1.97 X 0.98inch(L*W), Maximum Temperature: about 170℃ Ship out by USPS with tracking information and 7-15 days delivery time usually
Description
ICStation polyimide heater film uses polyimide as insulator outside, and the thermo foil as electric heating element inside. Formation through high temperature and high pressure heat sealing process. The polyimide heating film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability. Extremely thin and lightweight, polyimide heaters can quickly provide heat to where it is needed. This makes it can be widely applied to heating areas, and obtain quit high temperature control precision.
Specification:
Working Voltage: DC 12V
Amps: 0.5A
Power:7W
Film Size:50 X 25mm/1.97 X 0.98inch(L*W)
Maximum Temperature: about 170℃
Notice Please: These heating films can not control temperature itself, but other customer suggested to buy an inexpensive temperature controller with on board relay $10.00 on Amazon. Reads in C not F. Thank you for suggestion, we will develop this kind of temperature controller soon later as well.
6. Rheem SP20060 Electric Water Heater Tune-Up Kit
Description
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
7. 12V 10W Silica Gel Flexible Polyimide Heater Plate Adhesive Hot Foil Heater PI Heating Film Automotive Parts 32.5mm x 90mm
Feature
- Equipped with self adhesive can be fixed on the item surface easily.
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity.
- Extremely thin and lightweight, polyimide heaters can quickly provide heat to where it is needed.
- This makes it can be widely applied to heating areas, and obtain quit high temperature control precision.
- Perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance.
Description
1. Equipped with self adhesive can be fixed on the item surface easily.
2. Polyimide film has excellent dielectric strength, excellent resistance to electric intensity.
3. Extremely thin and lightweight, polyimide heaters can quickly provide heat to where it is needed.
4. This makes it can be widely applied to heating areas, and obtain quit high temperature control precision.
5. Perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance.
Working Voltage: DC 12V Power:10W
Plate Size: 3.3 x 9.0cm/1.30 x 3.54inch(L x W)
Material: Silica Gel
Package include: 1 x Film heating heater
8. 120PCS Solder Seal Wire Connectors – Sopoby Heat Shrink Solder Connectors – Waterproof Solder Butt Connector Kit Insulated Automotive Marine Electrical Wire Terminals
Feature
- ● CONVENIENT TO USE – NO need to crimp. Transparent sleeve provides precise inspection when strip and insert wires inside. Color-coded tubing makes it easy for you to pick up for use.
- ● DURABLE CONNECTION – Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding. Your wire will never slip out of the connector.
- ● WIDE APPLICATIONS – Ideal used for vehicle, motorcycle, boat, DIY electrical wirings and other outdoor applications. Sopoby Solder Connector Kit compliants with ROHS, ISO 9001:2008, SGS and CE standards.
- ● PACKAGE – 120PCS (40 Red, 40 Blue, 30 White, 10 Yellow). Shrink Ratio 2:1. Dual-walled Design: Polyolefin tubing outside and hot melt rings inside effectively improve waterproof performance and prevent wire corrosion.
- ● FRIENDLY AFTER-SALE SERVICE – We have a commitment to every buyer 100% satisfaction. Please don’t hesitate to contact us Sopoby if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction 🙂
9. LG Electronics 5301EL1001J Dryer Heater Assembly
Description
Product Description
LG 5301EL1001J Dryer Heater Assembly. For use with the following LG Electronics models: DLE5955W, RV1316AS, RV1321AS, RV1304A, RV1319VS, RV1310A, RV1310B, RV1327AY, DLE2050W, RV1316A, RV1316B, DLE2301R, DLE2301W, DLE2601R, DLE2601W, DLE2701V, RV1319E, DLEX3875V, DLEX3875W, DLEX0001TM, RV1308AS, RV1308BS, RV1316VS, RV1321VS, RV1308CS, RV1305AT, RV1310AS, DLEX2801L, DLEX2501V, DLEX2501W, DLEX2801R, DLEX3001P, RV1310BS, DLEX3001R, DLEX2801W, DLEX2901V, DLEX3001W, RV1310DS, DLEX3360W. Refer to your manual to ensure ordering the correct, compatible part.
From the Manufacturer
LG 5301EL1001J Dryer Heater Assembly. For use with the following LG Electronics models: DLE5955W, RV1316AS, RV1321AS, RV1304A, RV1319VS, RV1310A, RV1310B, RV1327AY, DLE2050W, RV1316A, RV1316B, DLE2301R, DLE2301W, DLE2601R, DLE2601W, DLE2701V, RV1319E, DLEX3875V, DLEX3875W, DLEX0001TM, RV1308AS, RV1308BS, RV1316VS, RV1321VS, RV1308CS, RV1305AT, RV1310AS, DLEX2801L, DLEX2501V, DLEX2501W, DLEX2801R, DLEX3001P, RV1310BS, DLEX3001R, DLEX2801W, DLEX2901V, DLEX3001W, RV1310DS, DLEX3360W. Refer to your manual to ensure ordering the correct, compatible part.
10. 12V,25W Silica Gel Flexible Polyimide Heater Plate Adhesive Hot Foil Heater PI Heating Film Automotive Parts,(60 x 70mm,12V,25W)
Feature
- Equipped with self adhesive can be fixed on the item surface easily
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity.
- Extremely thin and lightweight, polyimide heaters can quickly provide heat to where it is needed.
- This makes it can be widely applied to heating areas, and obtain quit high temperature control precision
- Perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance
Description
1. Equipped with self adhesive can be fixed on the item surface easily.
2. Polyimide film has excellent dielectric strength, excellent resistance to electric intensity.
3. Extremely thin and lightweight, polyimide heaters can quickly provide heat to where it is needed.
4. This makes it can be widely applied to heating areas, and obtain quit high temperature control precision.
5. Perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance.
Material: Silica Gel
Package include: 1 x PI film heater
Conclusion
By our suggestions above, we hope that you can found Arduino Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!
