The Best Drainvac Little Giant Central Vacuum System

The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

The 93730 is designed to use your central vacuum system in the garage or work shop for fast effective clean-up. The Cen-Tec exclusive tool set was designed with the unique cleaning requirements associated with detailing cars, boats, and RV’s. The tool set is set at a unique 30 degree angle not the typical 45 degree to relax your wrist and reduce the effort that comes from trying to position the tool at the proper angle for effective cleaning. The nylon fill dusting tool is paint brush soft with extra long fill to reach into the louvers on your car dash, the deep corner when the dash meets the windshield and down into the deep pockets on the door panels. A second dusting tool is ideal for grooming upholstery and open, hard surfaces. The upholstery tool feature can be angled down for gentle cleaning or angled up to engage aggressive teeth for raising matted carpet or releasing stuck on dirt that dries and grabs the carpet surface. The two extension wands a 12” natural fill floor brush extends the use of the 93730 to floors and walls great for capturing cobwebs or saw dust. The 30 foot crush proof commercial grade hose will last for years, even in harsh high use environments. The 93730 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac.

The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.

The Cen-Tec 92927 central vacuum accessory package is designed to provide superior cleaning for today’s home with both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishing and we have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The universal hose end makes the 92927 compatible with all major brands of central vacuums including beam, ELECTROLUX, eureka, VacuMaid, Vacuflo, Nutone, Cyclovac, Canavac, husky, star power, Md, and imperium brands. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance. The quiet Drive poly-V Drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft Bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.

The #99702 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also included is an installed knit hose sock, which saves your furniture and furnishings from the wear and tear of the hose.

The 94038 is designed for new and replacement requirements for a superior air turbine floor nozzle for cleaning carpeted surfaces accompanied by the tool necessary for safe cleaning of hard floor surfaces and all above the floor cleaning needs. The 35 foot crush proof low voltage hose permits control of the central vacuum from the hose handle. The Italian made chrome steel telescopic wand is designed for the wand diameter to increase as it extends from floor to hose insuring maximum airflow. The premium cleaning accessories are ideal for cleaning hard surfaces, soft upholstery, and into tight spaces and can be carried along with you on a convenient wand mounted tool clip. The 94038 is ideal for use with all major brands of central vacuums including Beam, NuEra, Husky, ProLux, Vacumaid, Vacuflo, Canavac, Eureka, Cyclovac, Nutone, Honeywell, MD, Wal Vac, Galaxie, and Imperium.

The 91431 is designed to be a general use straight air accessory set for the home, shop, or garage. Often it is used as a second tool set Complimenting the power nozzle or Turbine package that came with the central vacuum. Having a second tool set can save you time and effort moving a tool set from floor to floor in multi-story homes. The hose end is designed for what has historically been industry standard inlets and will activate a system with low voltage contacts in the wall valve. There were a few valves typically produced before 1980 which may use a micro-switch for activation of the vacuum. In most cases the 91431 will still work but the automatic activation of the system will not be delivered by the banded cuff. The set includes a full range attachments for most standard household cleaning jobs. This set is deal for a basement, garage, or general use in the home, especially on hard floor areas. The floor brush is ideal for cleaning hardwood, tile, stone, and vinyl.

Enhance your vacuum with Broan-NuTone’s Crush-Proof Central Vacuum Hose! This low-voltage hose springs back to its original shape after every use. The durable vinyl reinforced construction has a dark gray finish to ensure long-lasting use. The crush-proof vacuum hose features an on/off switch for easy use. It includes a patent-pending universal hose end which fits all Broan-NuTone central vacuums and most other standard inlets. This hose is 30-feet in length and has a 1.38″ inner hose diameter. Keep your house spotless with Broan-NuTone’s Crush-Proof Central Vacuum Hose!