The Best Dust Collector 3 Hp

Powder coated paint Bag volume: 10.8 cubic feet Static pressure: 14.4 Inch Air suction capacity: Approximately 2800 CFM Motor size: 3 HP, 220V, Single-phase, 3,450 RPM, Motor Amp draw: 240V – 18A

Amazon.com

Powermatic’s PM1900TX-CK1 dust collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines thanks to its exclusive TurboCone technology, which improves chip separation to prevent clogging of the filter and increases packing efficiency of the collector bag. With a collection capacity of 10 cubic feet, a sound rating of 75 to 90 decibels, and a 3-horsepower motor, the PM1900TX-CK1 provides a combination of power and simplicity that makes it both productive and easy to use.

PM1900TX-CK1 Dust Collector At a Glance: Canister filter captures 98% of 2-micron particles 2-micron canister filters offer over six times filtering surface area of standard bags Triple 4-inch dust ports allow for several hoses to be attached at the same time Dimensions: 61 inches by 30 inches by 72 inches (assembled); weighs 268 pounds Five-year warranty

Powermatic’s PM1900TX-CK1 dust collector offers superior particle collection thanks to its exclusive TurboCone technology. View larger

Convenience and Common Sense
Many of the design features of the PM1900TX-CK1 allow for straightforward and expedient use. The canister filter offers superior filtering surface area over standard bags, and the clear collector bags feature a large capacity–which means less downtime changing them (but when you do need to change them, a snap ring makes for rapid installation and removal). The all-metal duct improves rigidity and air flow, and the 14-inch-diameter impeller is powered by a 3-horsepower motor for peak performance. Plus, four heavy-duty casters make for easy mobility around the workshop.

About Powermatic
From a family-operated corn-milling operation in McMinnville, Tennessee, to today’s 400,000-square-foot facility in LaVergne, Tennessee, the evolution of Powermatic has echoed the success of American business ingenuity throughout the 20th century and into the new millennium. Founded in 1921, Powermatic is now a leader in general-purpose industrial woodworking machinery.

What’s in the Box
One Powermatic PM1900TX-CK1 dust collector, 3HP 1PH 230-volt, 2-micron canister kit.

From the Manufacturer

The PM1900 Dust Collector features the exclusive Turbo Cone, which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canister filter offers superior filtering surface area over standard bags, and captures 98 percent of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Amazon.com

Powermatic’s PM1900TX-BK3 dust collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines thanks to its exclusive TurboCone technology, which improves chip separation to prevent clogging of the filter and increases packing efficiency of the collector bag. With a collection capacity of 10 cubic feet, a sound rating of 75 to 90 decibels, and a 3-horsepower motor, the PM1900TX-BK3 provides a combination of power and simplicity that makes it both productive and easy to use.

PM1900TX-BK3 Dust Collector At a Glance: Remote-controlled digital timer can be programmed for up to 99 minutes 30-micron filter bags for improved capture of fine dust particles Triple 4-inch dust ports allow for several hoses to be attached at the same time Dimensions: 61 inches by 30 inches by 94 inches (assembled); weighs 207 pounds Five-year warranty

Powermatic’s PM1900TX-BK3 dust collector offers superior particle collection thanks to its exclusive TurboCone technology. View larger

Convenience and Common Sense
Many of the design features of the PM1900TX-BK3 allow for straightforward and expedient use. The canister filter offers superior filtering surface area over standard bags, and the clear collector bags feature a large capacity–which means less downtime changing them (but when you do need to change them, a snap ring makes for rapid installation and removal). The all-metal duct improves rigidity and air flow, and the 14-inch-diameter impeller is powered by a 3-horsepower motor for peak performance. Plus, four heavy-duty casters make for easy mobility around the workshop.

About Powermatic
From a family-operated corn-milling operation in McMinnville, Tennessee, to today’s 400,000-square-foot facility in LaVergne, Tennessee, the evolution of Powermatic has echoed the success of American business ingenuity throughout the 20th century and into the new millennium. Founded in 1921, Powermatic is now a leader in general-purpose industrial woodworking machinery.

What’s in the Box
One Powermatic PM1900TX-BK3 dust collector, 3HP 3PH 230/460-volt, 30-micron bag kit.

From the Manufacturer

The PM1900 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive Turbo Cone, improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98 percent of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

This Shop Fox Dust Collector features a 2 HP motor and an extra Heavy-Duty 12-inch impeller that moves 1,550 cubic feet of air every minute. When it comes to performance and value, this one is hard to beat.

This 1-1/2 HP Portable Cyclone pulls 806 CFM and has a maximum static pressure of 10.4″. When the time comes, collected dust is easy to dispose of thanks to the 20-gallon drum with casters and plastic bag liners. The viewing window on the side of the drum eliminates any guesswork of when it’s time to empty the dust, and the lever and cable lid-raising mechanism makes emptying it a cinch. The 2.0 micron pleated filter also has an internal cleaning paddle to help keep the filter at peak performance. For wood dust only. Specifications: Motor: 1-1/2 HP, 120V/240V*, pre-wired 120V, single-phase, Class E induction, 3450 RPM, *Additional parts required for purchase for 240V conversion. Remote-controlled magnetic switch with thermal overload protection. CFM: 806. Static pressure: 10.4″. Inlet: 6″ (or 4″ x 2 with included Y). Filter Rating: 0.2 – 2 Micron. Drum: 20 gallon. Overall height: 70-1/2″. Lever and cable lid-raising mechanism. Compact design with low footprint and headroom space required. Paddle for maintaining filter efficiency. Rolling casters for mobility. Back-pressure hose keeps plastic drum liners in place. Easy to clean and maintain. Footprint: 32″ x 32″ x 32″. Approximate shipping weight: 147 lbs.

Amazon.com

Powermatic’s PM1900TX-BK1 dust collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines thanks to its exclusive TurboCone technology, which improves chip separation to prevent clogging of the filter and increases packing efficiency of the collector bag. With a collection capacity of 10 cubic feet, a sound rating of 75 to 90 decibels, and a 3-horsepower motor, the PM1900TX-BK1 provides a combination of power and simplicity that makes it both productive and easy to use.

PM1900TX-BK1 Dust Collector At a Glance: Remote-controlled digital timer can be programmed for up to 99 minutes 30-micron filter bags for improved capture of fine dust particles Triple 4-inch dust ports allow for several hoses to be attached at the same time Dimensions: 61 inches by 30 inches by 94 inches (assembled); weighs 211 pounds Five-year warranty

Powermatic’s PM1900TX-BK1 dust collector offers superior particle collection thanks to its exclusive TurboCone technology. View larger

Convenience and Common Sense
Many of the design features of the PM1900TX-BK1 allow for straightforward and expedient use. The canister filter offers superior filtering surface area over standard bags, and the clear collector bags feature a large capacity–which means less downtime changing them (but when you do need to change them, a snap ring makes for rapid installation and removal). The all-metal duct improves rigidity and air flow, and the 14-inch-diameter impeller is powered by a 3-horsepower motor for peak performance. Plus, four heavy-duty casters make for easy mobility around the workshop.

About Powermatic
From a family-operated corn-milling operation in McMinnville, Tennessee, to today’s 400,000-square-foot facility in LaVergne, Tennessee, the evolution of Powermatic has echoed the success of American business ingenuity throughout the 20th century and into the new millennium. Founded in 1921, Powermatic is now a leader in general-purpose industrial woodworking machinery.

What’s in the Box
One Powermatic PM1900TX-BK1 dust collector, 3HP 1PH 230-volt, 30-micron bag kit.

From the Manufacturer

The PM1900 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive Turbo Cone, improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers over six times the filtering area of standard filter bags, collects 98 percent of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. Multiple connection port capability makes this machine a central dust collection system for the entire woodworking shop. Four swivel casters and conveniently located handles allow for easy mobility.