Finding your suitable readers for furniture struts is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for furniture struts including detail information and customer reviews. Let’s find out which is your favorite one.
921 reviews analysed
1. Apexstone 22 5Lb Spring Support Shocks
What We Like
- Lids soft open gently,Ideal for supporting the lid to keep it open
- Pressure:100N/22.5lb (Per Strut)
- Length ( hole center to hole center) :9-11/16”
- Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″
- Support opens lids to a maximum angle of 100 degrees
- Instructions Included, Screws Included
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Our Verdict
Value for money is the ultimate aim of every person out there. You want the best you can (Or better) for the bucks you pay. In terms of Furniture Struts, Apexstone 22 5Lb Spring Support Shocks would be your best bet for getting a value for money. Launched Quite time Ago Apexstone 22 5Lb Spring Support Shocks was the best-sold product and even today, the sales number speak.
Having such amazing features, all this is bundled up at a cost, which may seem high for few, but is actually very good if you compare its features. Our bet is Apexstone 22 5Lb Spring Support Shocks would be the Best Furniture Struts for Money.
2. Apexstone Close Support Safety Hinge
What We Like
- Lids lower gently,Ideal for SOFT CLOSING lid to prevent from slamming so that it won’t smash kid’s fingers
- Force:33 Lbs(150 N),Length (Center-to-Center): 8.7 Inch(220 mm),Extended Length (Center-to-Center):14.2 Inch(360 mm)
- SOFT DOWN the door/lid which the SIDE LENGTH is between 10 and 30 Inch, the WEIGHT is between 10 and 30 Lbs
- As the Installation,the measurements are 3 1/2 Inch /90 mm from the back of the lid, 7 5/8 Inch/195 mm from the back of the cabinet, and 8 5/8 inch/220 mm from the bottom of the cabinet. While if unfortunately you feel it’s too weak,you can move the mounting point on the lid 20 mm(0.79 inch) towards the opposite direction of the hinges, OR you can move it on the cabinet 20 mm(0.79 inch) towards the back of the cabinet
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT DOWN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Our Verdict
If you are the sort of a person who doesn’t compromise on quality and is ready to shell a little extra then Apexstone Close Support Safety Hinge is your choice. They say you either buy a quality product once or buy cheap products every day, the cost comes to same.
The new Apexstone Close Support Safety Hinge comes with best Price. It is industry’s most trusted, most preferred and quality Furniture Struts and it considered as Gold Standard by many users as well as non-users.
If you are looking for a long-time investment with a quality Furniture Struts then don’t look beyond Apexstone Close Support Safety Hinge. The product is featured, highlighted and appreciated in Reviews of Furniture Struts in 2020 and this has been backed by many users.
3. Apexstone Struts Springs Support Shocks
Our Verdict
Going ahead with our list, we have something very specific to a specific audience. Yes, Apexstone Struts Springs Support Shocks has a very selective audience with specific taste. It satisfies customer expectations (Given that your expectations don’t cross a limit) and it adds value for money but more importantly, it adds a style to the user which can be your fashion statement.
Apexstone Struts Springs Support Shocks is definitely the must-buy for those who need a little of both quality and price efficiency and as per our analysis, Apexstone Struts Springs Support Shocks easily gets the award of Best Furniture Struts Under 100$.
4. Apexstone 15Inch Spring Support L Type
What We Like
- CAUTIONS: IT’S VERY STRONG!!! YOU CAN NOT COMPRESS IT BY HAND EVEN IF YOU WERE The Rock Johnson.NOT SUITABLE FOR TOY CHEST OR WINDOW !!!
- IF YOU DOOR/LID IS LESS THAN 65 LBS ,PLEASE CHOOSE LESS PRESSURE GAS STRUT.IF YOU PROJECT IS MORE THAN 65 LBS,YOU JUST NEED 1 TO SUPPORT IT.IF YOU DOOR IS MORE THAN 120 LBS, YOU NEED 2.
- NO INSTRUCTIONS! NO SCREWS! WORKING TEMPERATURE: -10 ℃ – 40 ℃. Force:67 Lbs/300 N(Per Strut),Length (Center-to-Center):14.96 inch(380 mm),Compressed Length (Center-to-Center):9.06 inch(230 mm).Bracket Holes’ Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width)
- If you want to open the lid at 90-120 degrees, the mounting point on the lid is at the 120-130 mm(4.72-5.12 inch) to the hinge’s direction.If you want to open the lid at more than 120 degrees, the mounting point on the door is at the 75 mm(2.95 inch) to the hinges direction.If you feel the it’s too powerful, you can move the mounting point 20 mm(0.79 inch) towards the hinges’s direction ,while if you feel it’s too weak,you can move it 20 mm(0.79 inch) towards the opposite direction
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return
Our Verdict
Apexstone 15Inch Spring Support L Type is a veteran in the market and has been here for a long time. It offers something of a unique feature which no other competitor offers.
Go for Apexstone 15Inch Spring Support L Type if you want to try out something of a fusion of new and classic. Fun & Interesting Fact about Furniture Struts is that even though Apexstone 15Inch Spring Support L Type is a veteran, the users are mostly younger generation. You can say fashion makes a turn after a century or so and things repeat.
5. Apexstone Strut Spring Support Shocks
What We Like
- Lids soft open gently,Ideal for supporting the lid to keep it open
- Force:18 Lbs(Per Strut),Length (Center-to-Center):7 inch(180 mm),Compressed Length (Center-to-Center):5.12 inch(130mm)
- Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉
- Package included: 2 X 80N 7 Inch Gas Strut and 10 X Screws
- We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Our Verdict
If you are buying a Furniture Struts for the first time, then you should have Apexstone Strut Spring Support Shocks. It has fewer features when you make Furniture Struts comparisons of Apexstone Strut Spring Support Shocks with any other Furniture Struts but what it has is ease of use and best in class service. Go ahead and Grab a Furniture Struts, grab any Furniture Struts but if you are first time user and want a good experience do not look anywhere other than Apexstone Strut Spring Support Shocks
6. Puntales Herramientas Resistente Proyectos Bricolaje
What We Like
- 15in 67lb gas shocks fit lids and doors with side lengths Over 35 INCHES. A single gas spring can hold up at least 65lb and two gas springs can support at least 120lb. It’s very powerful and usually used on heavy-duty equipment such as RV queen bed lift, toolbox lid, Camper Shell, Truck Canopy, Trap door, Trailer door, Trash bin and other DIY Medium or Heavy equipment.
- Extended Length: 14.96 Inches (380mm), Compressed Length: 9.06 Inches (230mm), Force: 300 N/67Lbs Per Strut, Bracket Holes’ Size: 8 mm(diameter), 8 mm(diameter), 10 mm X 8 mm(Length X Width). No screws included.
- The mounting point on the lid is at the 4.72-5.12 inch（120-130 mm）towards the hinge’s direction, the lid will open about 90-120 degrees. The mounting point on the lid is at 2.95 inch（75 mm） towards the hinge’s direction, the lid will open about 120 degrees. (Please refer to the installation diagram in the product page.
- Installation Tips: If you feel it is too powerful and you have a lot of flexibility in where they can mount, you can move the mount point on the lid 0.79 inches towards the hinges’ direction. The same if you feel weak please try moving the mounting point about 0.79 inches in the opposite direction.
- A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click “Ask Seller” Besides Your Order for In-time Assistance!
Our Verdict
Puntales Herramientas Resistente Proyectos Bricolaje is a relatively new and late entrant in the market but surprisingly has surpassed beyond Apexstone 80N/18Lb Gas Strut,Gas Spring,Lid Support,Gas Shocks,Lift Support,Lid Stay,Set Of 2 which have been in market longer than anyone. Puntales Herramientas Resistente Proyectos Bricolaje brings you the best of the quality in the lowest possible cost. The Best feature of Puntales Herramientas Resistente Proyectos Bricolaje is what has kept in the market.
It certainly makes appearance in Reviews of Furniture Struts in 2020 owing to its price penetration strategy in the market. If you own a Furniture Struts and it could be any of the high value Furniture Struts, chances are that would be much costlier than Puntales Herramientas Resistente Proyectos Bricolaje. Puntales Herramientas Resistente Proyectos Bricolaje will have more than 50% of all its features.
7. Support Hinge Heavy Duty Close
What We Like
- DURABLE MATERIAL–Made of cold-rolled steel in Satin Nickel, high quality
- POWERFUL SUPPORT–Pressure: 200N/44lb (per Strut), Max Weight Support–50lb/2pcs
- HEAVY DUTY LID SUPPORT HINGE— 200N, Designed to support heavy drop lids of chest, toy box, heavy bench lid, etc, work perfectly for a soft close
- HIGH RECOMMENDED WEIGHT OF LID STAY–40lb to 50lb. Gas spring fit most of the lids of box when a stay and soft close is needed only if the weight of your lid is between 40lb–50lb, and have a 9 inch clearance.
- EASY TO INSTALL–Comes with 2 pack, screws included in package for installation
Our Verdict
Support Hinge Heavy Duty Close is another one which falls under Best X for money. It is most regularly advertised product and we see ads of it almost everywhere. In the past, Support Hinge Heavy Duty Close ’s parent company decided to launch a new line of Furniture Struts and that is what has revived them. Support Hinge Heavy Duty Close has really upgraded itself to the current style and market changes and the best part of Support Hinge Heavy Duty Close is amazing features.
8. Furniture Cabinet Hydraulic Hardware Fittings
What We Like
- Size: Force: 200N/ 45lb, Extended Length: 270mm(10.6inch)
- Compressed length:180mm(7inch)
- Ball socket to ball socket distance: 245mm(9.6inch)
- High quality: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years. high strength material piston cylinder body is integrated with floor connecting rod, with stronger load and flexible switch.
- Protect from noise: easy opening of kitchen cabinet doors,lift up opening cabinet door panels,silence and soft with cabinet doors close.
- Applicability: Hydraulic support, automatic expansion. Applicable to drawer,Decorative paintings， kitchen cupboard door, cabinet and so on, most cabinets fit.
- Easy to install: durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.
Our Verdict
Furniture Cabinet Hydraulic Hardware Fittings is present in top 10 since a long time. In terms of customer satisfaction and ease of use, Furniture Cabinet Hydraulic Hardware Fittings wins the users. Most of them who buy Furniture Cabinet Hydraulic Hardware Fittings once wont by anything else although it offers very limited features and specifications.
The only reason for brand loyalty is ease of use. This product had a special mention in Reviews of Furniture Struts in 2020 for not expanding user base but definitely not loosing any. The shift of people from Furniture Struts to any other Furniture Struts is least.
9. Pneumatic Furniture Cabinet Hydraulic Support
What We Like
- Size: Force: 100N/ 22.5lb, Extended Length: 270mm(10.6inch)
- Compressed length: 180mm(7inch)
- Ball socket to ball socket distance: 245mm(9.6inch)
- High quality: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years. high strength material piston cylinder body is integrated with floor connecting rod, with stronger load and flexible switch.
- Protect from noise: easy opening of kitchen cabinet doors,lift up opening cabinet door panels,silence and soft with cabinet doors close.
- Applicability: Hydraulic support, automatic expansion. Applicable to drawer,Decorative paintings， kitchen cupboard door, cabinet and so on, most cabinets fit.
- Easy to install: durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.
Our Verdict
Pneumatic Furniture Cabinet Hydraulic Support is again a mid of quality and price. It offers limited features in this pricing. There is another variant of Pneumatic Furniture Cabinet Hydraulic Support which falls into premium category but Pneumatic Furniture Cabinet Hydraulic Supportis specifically targeted for mid-segment.
Pneumatic Furniture Cabinet Hydraulic Support offers such a amazing features which makes it better than 70% of Furniture Struts available in the market today. Pneumatic Furniture Cabinet Hydraulic Support was our personal favorite and was voted as most admired product in TOP 10 Best Furniture Struts to Buy in 2020 – TOP Picks. We hope it makes to that list again this year.
Conclusion
By our suggestions above, we hope that you can found Furniture Struts for you.Please don’t forget to share your experience by comment in this post. Thank you!
