740 reviews analysed
![Light Timer Switch UL Listed, Fosmon 9 Setting 1875W in-Wall Countdown Electrical Switch [OFF-5-10-15-20-30 Min, 1-2-4 Hr] Energy Saving for Fans, Vent, Lights, Heaters, Decorative (2 Pack)](https://images-na.ssl-images-amazon.com/images/I/61FT-eRh55L._AC_SL300_.jpg)
1. GE Push Button In-Wall Digital Countdown Timer Switch, 5-15-30 Minute and 1-2-4 Hour Presets, On/Off, NO Neutral Wire Required, for Lights, Exhaust Fans, and Heaters, Décor Wall Plate Included, 15318
Feature
- Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs
- Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time
- Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time
- Includes a single décor wall plate and fits most single or multi-gang rocker plates
- Easy direct wire installation
- DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP
2. ENERLITES 4-Hour Countdown Timer Switch, 5-10-30-60 Min, 2-4 Hour, For Bathroom Fans, Heaters, Lights, LED Indicator, 120VAC 800W, No Neutral Wire Required, UL Listed, HET06-J-W, White
Feature
- Automatically turns a load off on a countdown timer
- saves energy by ensuring lights are always turned off
- Six timer options to choose from: 5 min, 10 min, 30 min, 60 min, 2 hour, and 4 hour
- manual button overrides the timer
- Blue LED indicators feature two modes
- mode 1: LED flashes twice indicating setting success then stays off, mode 2: LED stays on during the selected time delay then shuts off
- Perfect for lights, ceiling fans, bathroom fans and heaters, and any other appliances that are usually forgotten
- NEUTRAL NOT REQUIRED, ground wire required
- wall plate sold separately
- 120VAC 60Hz, incandescent/halogen: 800W, LED/CFL: 150W, motor: 1/4Hp
- operating temperature 32°F to 131°F
- UL 94 V2 flammability rating
- UL listed
- 1-year warranty
Description
The ENERLITES HET06-J programmable timer’s simple and modern design makes it a great upgrade for your home or office. This timer switch features six preset time buttons and one manual ON button with six selectable times: 5 min, 10 min, 30 min, 60 min, 2 hours, and 4 hours. All loads connected to the timer will automatically turn off when the preset time expires. Not only is the switch user friendly for all ages, it can also be easily replaced with a standard single pole light or ventilation fan switch; compatible with most types of lights. TECHNICAL SPECS: 120VAC 60Hz, incandescent/halogen: 800W, LED/CFL: 150W, motor: 1/4Hp; single pole; UL listed; neutral not required, but ground wire required for installation.
3. GE Countdown Timer, in Wall Mechanical Switch, Spring Wound, Up to 15, Auto Shut Off, 1-Minute Intervals, No Neutral Wire Needed, Ideal for Lights, Exhaust Fans, and Heaters, 15303
Feature
- Spring-wound timer counts down to shut off at desired time. Up to 15-minute countdown at 1-minute intervals.
- Ideal for use with lights, exhaust fans, heaters, pumps and other appliances.
- Easy to install – NO NEUTRAL WIRE needed. Directly wire this timer into a standard light switch (standard toggle or decorator plate)
- Includes metal wall plate. Incandescent, CFL and LED compatible.
- Electrical Ratings: 125VAC, 50/60 Hz: 20 A Res. /Gen. , 7 A Tungsten, 1 HP. 250VAC, 50/60 Hz: 10A Res. /Gen. , 2 HP. 277VAC, 50/60 Hz: 10 A Res. /Gen. ,
4. Century Heavy Duty 60-Minute In-Wall Spring Loaded Countdown Timer, Mechanical Switch, 2 Free Plate (White and Silver Metallic)
Feature
- Automatically turns off after selected time, up to 60 minutes.
- Directly wire this timer into a standard light switch (standard toggle or decorator plate)
- Easily installs in place of existing wall switch, Fits any single or multi-Gang decorator or toggle switch plate
- Works with lamps, fans and other appliances. Ratings: 125-Volt, 60 Hz./20-Amp, 2500-Watt resistive/8-Amp, 1000-Watt tungsten/5-Amp, 625 W ballast, 1 HP
- Please note that wall plate cover is not included.
Description
Century 60-Minute In-Wall Spring Loaded Countdown Timer automatically turns off fans, lights, motors, heaters and other energy consuming loads. Installs conveniently in single or multi-Gang electrical wall boxes and easily replaces SPST toggle switches. Fits any single or multi-Gang decorator or toggle switch plate. Package includes timer device, knob and connection accessories and 2 free face plate designed to fit either toggle or decorator style switch plates. This Timer will ensure your bathroom exhaust fans, basement lights, bathroom heat lamps and kitchen fans turn off after a set amount of time. All with the simple turn of the dial. This timer is compatible with compact fluorescent lighting. The Century Timer bring simplicity to your life, by maximizing convenience, security and energy savings.
5. Leviton LTB30-1LZ Decora 1800W Incandescent/20A Resistive-Inductive 1HP Preset 5-10-15-30 Minute Countdown Timer Switch, White/Ivory/Light Almond
Feature
- 4 Presets: 5-10-15-30 minutes
- Simple press and hold override timer function
- 120VAC, 60Hz, 1800W Incandescent, 600W CFL, 5A LED, 20A resistive/inductive, 1HP, single pole 3-way or more locations, neutral required
- Installation instructions included and 3-way only works with Vizia + Remote – VP0SR (sold separately)
- Products with suffix –Z are packaged 3 colors in a box: white, Ivory and light almond
6. ENERLITES Countdown Timer Switch, Fan Switch Timer, Wall Timer Switch, Light Timer Switch, Bathroom Timer Switch, 5 min – 4 hrs, Night Light LED Indicator, Neutral Wire Required, HET06, White, 2-Pack
Feature
- TIMER SWITCH WALL Controls the ON/OFF operation of lights, fans, air conditioner and heaters according to the countdown time set.
- 7 BUTTON COUNTDOWN TIMER Six preset countdown time options: 5, 10, 30 or 60 mins, 2 or 4 hrs
- Bottom button for re-set. Replaces any standard wall switch, fits any standard decorator wall plate.
- LED NIGHT LIGHT MODES Mode 1: Blue LED light flashes twice indicating setting success then STAYS OFF. Mode 2: LED always on. Use mode 1 for bedroom installations.
- ENERGY EFFICIENT Ideal energy saving solution for bedroom, exhaust fans, sprinkle system, garage and laundry room applications. Conserve energy and only leave the motor on as needed.
- WALL TIMER SWITCH FOR LIGHTS Replaces wall switch or spring wound timer
- NEUTRAL WIRE REQUIRED. 2 pack includes 2 wall plates (8831-W)
Description
Enerlites HET06 7 button In-Wall Countdown Timer Switch w/ Decorative Wall Plate, Minimum 5 minutes to Maximum 4 Hours is designed to replace the wall switch or spring wound timer to provide better energy saving and ON/OFF control of all the lights, fans and heaters in your rooms and offices at the time desired. Six countdown time options bring you great experience in utilizing the timer switch to meet your different schedule need. Preset time countdown 5, 10, 20, 30 or 60 minutes, 2 or 4 hours. Push ON/Off button features easy operation. You can install it in bedroom, family room, bathroom heater timer switch and garage to turn off the light and fan automatically when the preset time is up. Two Indicator modes: Mode 1 – Blue LED light flashes ON/OFF twice indicating your time setting is successful, then the LED light will STAY OFF. Mode 2 – Blue LED will flash twice indicating your time setting is successful, then the LED light will STAY ON. HET06 In-Wall Countdown Time is your great energy control solution and lifestyle choice for home improvement and new home. NEUTRAL WIRE REQUIRED! Great for bedroom countdown timer with optional night light, this will not distract your sleep. Garage light is also a great place to install HET06 to set a timer for lights. Easy installation and easy operation, no need to configure any settings or change preset settings. This wall timer switch for lights can make your life easier and smarter with this smart home gadget.
7. ENERLITES HET06-4H-W HET06-W 5-10-30-60 Minutes 2-4 Hours Preset Countdown Timer Switch for Bathroom Exhaust Fan Light and Motors, w Decorator Wall Plate, White, 4
Feature
- COUNDOWN TIMER SWITCH – Press a button to set a countdown time for your light or bedroom ceiling fan, heater, and bathroom exhaust fan. Never worry about wasting energy in unoccupied rooms.
- 6 PRESET OPTION – Pick a timer option from 5 min, 10 min, 30 min, 60 min, 2 hour, and 4 hour time lapse
- or use the manual button to turn your LED/Fluorescent light bulb manually on and off.
- BLUE LED INDICATOR – 2 modes to indicate the preset time lapse. Mode 1: LED flashes and turns off during time lapse and flashes again once count down is finished. Mode 2: LED light stays on during the time lapse and turns off once the countdown is finished. (Watch instructional video)
- ENERGY SAVING – 100% satisfaction and never worry about wasting energy in unoccupied rooms, with 1-year warranty.
- NEUTRAL WIRE REQUIRED – Please check for Neutral Wire prior to purchase. DESCRIPTIONS – 120 VAC, 60 Hz. Incandescent: 1800W. Fluorescent: 1200VA. Motor ½HP. Operating Temperature: 32°F to 131°F (0°C to 55°C) Humidity: 95%RH, non-condensing.
8. Intermatic FD60MWC 60-Minute Spring-Wound In-Wall Countdown Timer Switch for Auto-Off control of Fans and Lights, White
Feature
- This spring-loaded mechanical countdown timer switch requires no electricity to operate
- This in-wall timer is designed to replace any standard wall switch, single or multi-gang, and is intended for use with a decorator wall plate (not included)
- Automatically limits the operating time to a maximum of 60 minutes for fans, lights and more
- Incandescent/fluorescent/CFL/LED compatible
- A neutral connection is not required for installation
Description
Product Description
The fd series decorator countdown timers are designed to replace any standard or decorator style wall switch, single- or multi-gang. These mechanical timers do not require electricity to operate. They automatically limit the on times for fans, lighting, motors, heaters and other energy consuming loads.
From the Manufacturer
These energy saving timers use no electricity to operate. These timers are designed to replace any standard wall switch, single or multi-gang, and automatically limit the “ON” time of fans, lights, motors, heaters and other energy consuming loads. Supplied with a molded white time dial plate designed to fit either toggle or decorator style switch plates; single or multi-gang with no field modifications required to fit either style switch plate. Time saving “up front” terminal connection with teeter type terminals and an easy “press-on” knob design ensure quick and easy installation.
9. Light Timer Switch UL Listed, Fosmon 9 Setting 1875W in-Wall Countdown Electrical Switch [OFF-5-10-15-20-30 Min, 1-2-4 Hr] Energy Saving for Fans, Vent, Lights, Heaters, Decorative (2 Pack)
![Light Timer Switch UL Listed, Fosmon 9 Setting 1875W in-Wall Countdown Electrical Switch [OFF-5-10-15-20-30 Min, 1-2-4 Hr] Energy Saving for Fans, Vent, Lights, Heaters, Decorative (2 Pack)](https://images-na.ssl-images-amazon.com/images/I/61FT-eRh55L._AC_SL1250_.jpg)
Feature
- [9 Pre-Set Options Timer Switch] The Fosmon in-wall timer switch pre-set the 5-10-15-20-30minutes, 1-2-4 hours countdown and off options. It is suitable for devices running for either short duration, such as bathroom vent fan, or long duration, such as night/security light.
- [Illuminated Button and LED Program Indicator] The button stays illuminated with cozy light blue color. The red LED program indicator stays on until the running program ends. The timer is easy to be seen and operated even in a dark room.
- [Universal Compatibility] Upgrade your regular light/fan switch to a pre-set timer switch, which saves your energy bill by always turning off your appliances on time. The timer is compatible with your regular single or multiple gang boxes or brackets. Only one single gang cover plate is included.
- [Safe and Heavy Duty] The timer is installed with a ground wire for better protection. The safety is certified with UL E211835. The 15A and ½ HP capacity allow you to use it with heavy duty items in your house. The neutral wire is required for the installation.
- [Limited Lifetime Warranty] Join millions of satisfied customers with our limited lifetime warranty, backed by our experienced and dedicated USA based customer service.
Conclusion
By our suggestions above, we hope that you can found Ge Fan Timer Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!
