Top 10 Gould 5 Hp Submersible

Goulds 10HS05422C 4″ Submersible Water Well Pump, 10 GPM, 1/2 HP, 230 V, 2 Wire

These high quality, below ground submersible pumps are designed for residential and small municipal water supply as well as light irrigation applications. They are constructed with a cast 303 stainless steel discharge head and motor adapter, superior sand handling capability, built-in stainless steel check valve, and a Centripro motor designed for continuous operation. Note: This is a 3 wire pump that requires a control box for operation. The control box is included with the pump.

1HP, 230V/60HZ/1PH, 7 stage, 33 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4” NPT discharge.
Warning: This is 220V pump!

Specifications:
* 4″ deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Built in check valve included.
* Submersible design creates quiet operation
* Unique design reduces its noise.
* 207 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* User’s manual included and installation tape kit included.
* Warranty: 12 months limited manufacturer’s warranty

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

Goulds 18HS10412C 4″ Submersible Water Well Pump, 18 GPM, 1 HP, 230 V, 3 Wire

Product Description

1/2 hp manual submersible utility pump with 10′ power cord and water cooled motor; requires monitoring to turn pump on/off; will drain from flat surfaces to 3/8″ and handles solids up to 1/8″ diameter; up to 3180 gph. Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information. Utility pumps are used to transfer water from one source to another or to drain water from surfaces. These pumps are typically used for draining water from sinks or tubs with clogged drains, emptying pools or spas, draining excess water on flooded basement floors, etc. Utility pumps are either portable or submersible. Portable means they are designed to operate outside the water with a hose placed in the water. Submersible means they are designed to be submersed in water. Submersible pumps can be provided with no on/off switch, which means they are manually operated or have a ‘smart’ switch that will detect the absence of water and will therefore shut off the pump automatically. Since most utility pumps are made of plastic and rubber components, running them dry (running them without water circulating in them), will result in the pump overheating and melting the plastic and rubber components. As a result it is required that you physically monitor pumps provided without switches so you can unplug them when the task is complete. ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO commitment is to produce pumps for the long term at the best value. Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

Goulds WE0311M Submersible Effluent Pump, 1/3 HP, Single Phase, 115 V, 10.7 Max Amps