The Best Goulds Shallow Well 34 Hp Pump

The J7 is specifically designed for homes farms cottages and booster services. Its Convertible design may be used on shallow or deep well applications using appropriate fittings.This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, amps: 14.8/7.4

Acquaer SJC075 is a 3/4 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.

Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

This Flotec Thermoplastic Shallow Well Jet Pump provides good pressure pumping, perfect for shallow wells less than 25-ft. deep. Thermoplastic construction gives high corrosion resistance. Comes with prewired 30/50 pressure switch. Amps 12.2/6.1, Flow GPH 720, HP 3/4, Max. PSI 78, Max. Suction Lift ft. 25, Max. Total Head ft. 181, Discharge Port in. 1, Self-Priming Yes, after initial prime, Suction Port in. 1 1/4, Thermal Overload Protection Yes, Volts 230/115, Pump Housing Thermoplastic, Dimensions L x W x H in. 22 13/16 x 11 1/16 x 10 1/2. Perfect for shallow wells less than 25-ft. deep Thermoplastic construction gives high corrosion resistance Comes with prewired 30/50 pressure switch Heavy-duty dual-voltage motor Self-priming after pump housing is initially filled

Product Description

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The eco-flo commitment is to produce pumps for the long term at the best value.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

3/4 horsepower, 115/230 Volts, noryl shallow well jet pump. Bearing to bearing stainless steel motor shaft. 1 1/4 inch suction and 1 inch discharge. Full time run capacitor to eliminate staring wear. Stainless steel mechanical seal. Designed for a maximum vertical suction lift of 25 feet. Pumps up to 850 gph. Pump capacity: 5 feet/850 gph, 10 feet/760 gph, 15 feet/670 gph, 20 feet/480 gph, 25 feet/425 gph.

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

Acquaer SJC050 is a 1/2 hp shallow well jet pump is designed for wells up to 25 ft. Deep. The pump can run at 115 or 230 Volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery.