The Best Kenmore Dishwasher Spring 154669101

This door spring is manufactured for a dishwasher door. The door spring applies tension to the dishwasher door so that the door does not drop too quickly when it is opening. If the door drops too quickly, it could cause damage to the dishwasher door or dishwasher door hinges. This spring is sold individually. Check the spring on the opposite side of the dishwasher door, they often wear at the same rate so you may want to replace both springs for exact tension on either side.

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: Frigidaire (FRIGB) 154669101 Door Spring

Genuine Original Equipment Manufacturer (OEM) parts! This door spring (part number 154579101) is for dishwashers. Door spring 154579101 applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. Use caution when installing the door spring because the spring is under tension and could snap. Wear work gloves to protect your hands during this repair. For Frigidaire, Crosley, & Kenmore.

Genuine Original Equipment Manufacturer (OEM) parts! This door spring (part number 154430501) is for dishwashers. Door spring 154430501 applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. Use caution when installing the door spring because the spring is under tension and could snap. Wear work gloves to protect your hands during this repair. For Frigidaire, Kenmore, Crosley, White-Westinghouse, Tappan, Galaxy, & Kelvinator.

Product Description

This is a genuine replacement part. The model number and name for the following item is: Door Spring 154237401 Frigidaire spring.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Door Spring 154237401 Frigidaire spring

A group of engineers came together and redesigned the part to make it last for years of service. The prongs that hold the wheels in place was replaced with a cap. A new brand was born under Exact Appliance Parts (EAP). Part may look different in appearance but function better than the discontinued OEM part # W10350376. The W10350376 has two wheels with a diameter of 0.90 inch each. Whirlpool markets major brands: Admiral, Amana, Estate, Inglis, Jenn-Air, KitchenAid, Kirkland, MayTag, Roper, Whirlpool, and etc.

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Genuine Original Equipment Manufacturer (OEM) parts! This door spring (part number 154430601) is for dishwashers. Door spring 154430601 applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. Use caution when installing the door spring because the spring is under tension and could snap. Wear work gloves to protect your hands during this repair. For Frigidaire, Kenmore, White-Westinghouse, & Crosley.

Brand new Dishwasher Door Spring 2 Pack for Frigidaire, AP3363442, PS815938, 154430501.

This is a Kitchen Basics 101 8531669 Dishwasher Water Valve Replacement for Kenmore KitchenAid Whirlpool AP3178609 PS887857 3178609. Designed to fit specific Whirlpool manufactured dishwasher models including Amana, Jenn Air Kenmore, Magic Chef, Roper and Maytag.

Works with Whirlpool models: GU2500XTPB0, GU2500XTPB1, GU2500XTPB3, GU2500XTPB6, GU2500XTPQ0, GU2500XTPQ1, GU2500XTPQ3, GU2500XTPQ6, GU2500XTPS0.

Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.