Top 9 Laser Diode Cooling

Specification:
Output Power: 100mw
Wavelength: 650nm,660nm
Working Voltage: 3V-5.5V
Working Current: 180mA
Working Temperature: -10 degrees~＋40 degrees
Duty Cycle: 10 minutes on, 3 minutes off
Laser Shape: Dot/Line/Cross
Dimensions: 13x42mm

Features:
1.This red laser module with built-in driver is an industrial electronic component and used for industrial testament, Lab etc.
2.This is adjustable 650nm 1mw Red laser module with three caps:Dot line and cross.You can change the caps to get different effects: dot line and cross,which is shown in the main photo.
3.Before carrying on some laser DIY activities, please protect your eyes before laser ray. Be sure the operator has experience in optics DIY or testing.

Package:
1 x Adjusted Red Diode Lasers Industrial 3v-5.5v 650nm 660nm 100mW Laser Dot/Line/Cross Module Focusable 13mmx42mm with Adapter & Heatsink

Gold color
size: 20*27*50mm
This is a 12mm inner diameter clamp with a holder specially made for fixing laser modules.

Package: 1 heatsink with a holder

Specification:
Output Power: 50mw
Wavelength: 405nm
Working Voltage: 5V (red wire for postive +, black wire for negative -)
Working Temperature: -15 degree~35 degree
Laser Shape: Dot/Line/Cross
Focusable(Dot): Yes
Adjustable: Yes
Material and Color: Metal
Lens: Plastics
Dimensions: 12 x 45mm (or sometimes 12 x 35mm according to factory batch)

Details:
1.It is a 405nm 50mw adjustable laser module with three caps:Dot line and cross.You can change the caps to get different effects: dot line and cross,which is shown in the main photo.
2.If you want to prolong the working time of this module, please add heatsink to this module.
3.Please keep the lens clean.

Note:
Please note that violet lasers is more dim when seen by naked eyes than green and red laser.Actually it’s powerful.Kindly please know it before ordering.Thanks!

Package:
1 x Adjusted Violet Blue Diode Lasers 405nm 50mw Dot/Line/Cross Module
1 x Heatsink
1 x Dot/Line/Cross caps

Specification
Output Power: 1mw
Wavelength: 980nm
Operating voltage: 3.0-5.0VDC
Continuous current: <>
Working Temperature: -10 degrees~+40 degrees
Dimensions: 12mmx30mm(sometimes 12x40mm according to factory production)
Outlet terminals XH-2.54 * 3PIN
TTL:>2.5V ON/<1.6v off,="" high="" open="" low="" off="" ,="" normal="" status="">
TTL Output: 0-15KHZ square wave
The Lens focus is adjustable, not fixed, can adjust to an appropriate spot size, and then fix it.
Off low, high open, normal status close If you only connect its black and red wire, the laser module would not be lighted and would not work.
Three-wire input, the red line is positive, black line is negative, TTL signal yellow line is positive.
If no signals,the yellow line connect + pole;If it does have signal,yellow line connect positive signals.

Features:
This 980nm laser module with driver built-in is an industrial electronic component and used for Industrial testament, Lab.
This is IR laser which will invisible for human eye,but only for night vision camera or our IR detection Card.Please be aware of it before buying.
http://www.amazon.com/dp/B00UKRTEF0
The laser module is and precise and sensitive optical instrument. Before carrying on some laser DIY activities, please read about the technical information first and protect your eyes before laser ray. Be sure the operator has experience in optics DIY or testing.
This laser module cannot work for a long time without addtional cooling heatsink, otherwise the laser diode’s life would be much shortened or get burnt.
If you need the heatsink to prolong the working time of module,please check the links below
http://www.amazon.com/dp/B00JZKEMI2

Package
1 x 980nm 1mw Infrared IR Laser Dot Module w/TTL 0-15KHz

Production Description:
12V TTL 200mW To 2W 445nm 450nm Laser Diode LD Power Supply Driver Board

Description:
Input Voltage:DC 8-14V Max.
Output Voltage:DC12V (adjustable) Max.
Output Current:3A (adjustable)
Complicable Laser Diode:200mW-2W 405/445/450/520nm (Red, Green and Blue Laser Drive Power)
Dimensions: 33 x 48mm (W x L)
Component Height: 13mm (including power board)

Feature:
Laser Diode LD Power Supply Driver Board.
For Red, Green and Blue Laser Drive Power.
For the laser driver, it can be used for various types of Reduced voltage constant current source.
AC / DC can be used, regardless of positive and negative input to improve the non-professional user convenience.
Widely used in a variety of stage laser light with TTL modulation, can work long hours.

Package included:
1X Laser Diode Power Supply Driver Board

Three-axis Adjustable Holder/Clamp/Mount 13.5mm 16mm 19.5mm 21.5mm 23.5mm for Laser Diode Module or Torch Cooling Heatsink

Specification:
Inner Diameter：13.5mm 16mm 19.5mm 21.5mm 23.5mm
The clamp specially made for fixing laser modules.
It can be flexibly adjusted.
Rotation degree is 360 degrees all-around direction

Package:
1 xThree-axis Adjustable Laser Module/Torch/Holder/Clamp/Mount

Features:
condition:new
Wavelength : 980nm
Output power : 50mW
Working Temperature: -10 Celsius ~ 40 Celsius
Size: 5.6mm with PD part
Number:HLD980050N4T

Details:
This Infrared laser diode has PD, is an industrial electronic component and used for as Industrial testament, Lab, DIY.
The laser diode is and precise and sensitive optical instrument. Before carrying on some laser DIY activities, please read about the technical information first and protect your eyes before laser ray. Be sure the operator has experience in optics DIY or testing. and Don’t operate when the power is connected.

Package:
1PC HLD980050N4T New 50mw 980nm TO-18 Infrared IR Laser Diode with PD