The Best Laundry Sprinkler Cap

Portable watering sprinkler nozzles
Pack of 4
Color: green and white
Material: plastic
Size: 32*70mm (1.25*2.75 inch)
Nozzle inner diameter: 27mm/1.06″
Great tool for garden watering, economical watering system

Note: this item may not fit all bottles, please check the size clearly before you buy

Easily attaches to hose end to keep out bugs and dirt. Vent holes to inhibit bacteria growth.

Describtion:
Bottle Cop Sprinkler
Material: PVC Plastic
Cap:
Inner diameter: 28 mm
Inner diameter (containing Screw thread): 26.5 mm
Package: 8 x Bottle Cop Sprinkler
Garden watering device.
These handy garden watering tools help deliver water where plants need it most.
Get straight to the root with water spikes.
Simply screw a spike onto a full bottle of water
You can combine water and plant food in a bottle then use the water spike to deliver the ultimate nourishing fluid.

Kindly Notice:
Please measure the bottle inner diameter before use.

MyLifeUNIT portable sprinkler nozzle is another method for watering, economical and convenient. Nozzle caped on a water or beverage bottle, squeeze the bottle, water will be sprinkled evenly and gently to the plants. You can control the water volume, water plants according to their needs.

Keep your washing machine drain discharge hose neatly and securely fastened to your utility tub with this adjustable and flexible simple hanger.

No need clips or holding it with your hands.

Just wrap the adjustable straps on the hose and clip the hanger on the side of your sink. Then reshape the hanger according to the shape of your sink.

Product Description

FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity

From the Manufacturer

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Foeller 63-0001 Features: Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology Corrosion-resistant, powder coated epoxy finish All cast iron construction Viton outer switch boot No sheet metal parts to rust or corrode Stainless steel screws, switch arm, guard and handle No screens to clog Watertight, neoprene square ring between motor and pump housing Solid, buoyant, polypropylene float Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor Upper and lower sleeve bearings running in bath of oil Entire unit pressure-tested after assembly Carbon and ceramic shaft seal Passes 1/2 spherical solids 1-1/2 NPT discharge On point: 7-1/4 Foeller 63-0001 Specifications: Height: 10-1/16″ Width: 10-1/16″ Motor: 3/10 HP Voltage: 115 RPM: 1550 Discharge Size: 1-1/2″ NPT Max Flow Rate: 43 gallons-per-minute Max Operating Temperature: 130*

Agrifim CAP-POP-5 – Pop-up Sprinkler Caps (Bag of 5) Agrifim Pop-up Sprinkler Caps is Agrifim’s solution to capping off a spray head. Water is rapidly becoming our most precious resource and this product provides a simple solution to eliminate water wasting spray heads . The two piece design works with all popular spray head designs. It can be used when converting spray head zones to drip irrigation, also to cap off spray heads that are no longer necessary after plantings become established. The Universal Cap Off is yet another way Agrifim is leading the way to efficient irrigation.