Top 10 Manual Lcd Touch Screen Vacuum Separator Machine

Product Description

14″ LCD Touch Screen Glass Separator Machine Built-in Vacuum Pump Phone Repair

14 inch LCD Separator Machine with Built-in Vacuum for Mobiles and Tablets

Features:

1. Safety power system inside, avoiding the electric leakage problem

2. Anti static body material, prevent the LCD and the flex cable being damaged from the static

3. Easy installation

4. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series.

5. Compatible for LCD or LED screen assembly

Specifications:

-Main Material: Metal

-Power:600w

-Input: 110V 60HZ

-Heating area:295x190MM

-Machine size:360*280*115mm

Application:

Step 1: Put rubber mat on heating plate.

Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.

Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.

Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.

Step 5: Finally you have finished the separating work, and do a good job.

Note:

Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories

Features:
1. Auto heating metal plate, maximum temperature is 400 centigrade.
2. Safety power system inside, avoiding the electric leakage problem
3. Anti static body material, prevent the LCD and the flex cable being damaged from the static
4. Easy installation
5. Silicon mat to stick the touch screen without any damaged
6. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series
7. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
8. Compatible for LCD or LED screen assembly
Specifications:
-Main Material: Metal
-Power:600w
-Input: 110V-250V 50/60HZ
-Heating area:295x190MM
-Machine size:360*280*115mm
Separate LCD front glass screen Built-in vacuum pump Manual LCD separator Suitable for 1~14 inch phone or tablet PC.
Application:
Step 1: Put rubber mat on heating plate.
Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.
Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.
Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.
Step 5: Finally you have finished the separating work, and do a good job.
Note:
Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories
Shipped from the United States, quickly arrived through logistics such as UPS/USPS/FEXDE

Specification:
Power:370w
Temperature range:50-120℃
Display mode:LED display
Temperature stability:±2℃（static state）
Vacuum pump power:12W
Vacuum pressure:0.05MPa
Aluminum to ground resistance:＜2Ω
Aluminum size:200mm(L)x110mm(W)
Overall dimensions:300mmX160mmX90mm
UV curing lamp power:12W
USB output:5V,1A
Opearating temperature:0~40℃/32℉~104℉
Storage temperature:-20℃~80℃、-4℉~176℉
Storage humidity:35%~45%
Model: US 110V / EU 220V
Package included:
1 x LCD Touch Screen Glass Separator
Shipped from the United States, quickly arrived through logistics such as UPS/USPS/FEXDE

Specification：

Name: Vacuum Screen Separator Machine

Model: TBK – 988

Power supply: AC100-240v

Power: 250w

Weight: 3kg

Size: 15*26*12cm

Use：This machine set can help separate the cell phone’s touch screen from LCD, or touch screen from front glass lens.

Compatible:

For Sam-sung and other smart mobile phone which LCD screen’s size is 7 inch and below.

Features:

1. Just put on LCD on the heating panel, turn on “Vacuum Pump” switch, then you can separate the glass. And the LCD is firmly fixed on the panel while separating.

2. The shell of vacuum LCD Separator is metal. And it’s better than back light vacuum LCD Separator.

3. The Vacuum LCD separator equip with four bearings. It’s more convenient when separating;

4. The surface of heating plate is very smooth. It makes fix broken LCD firmly;

5. The LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly.

6. This machine set can help separate the cell phone’s touch screen from LCD, or touch screen from front glass lens.

Package Contents:

1 X Main Unite

1 X 50M Cutting Line

1 X Detach Screen Bar

1 X Power Cord

Packing size: 31*21*18CM

Package weight: 3KG

❥Our products shipped from the United States, quickly arrived through logistics such as UPS/USPS/FEDEX, delivery time need about 4-9 days.

❥Good quality and after-sales service guarantee: If you have any questions, you can contact KOUGER customer service, we will give you a satisfactory answer within 24 hours!

❥We are grateful for the opportunity to learn from your experience and we’ll try our best to improve our products and services all the way.

Features:

1. Auto heating metal plate, maximum temperature is 400 centigrade.

2. Safety power system inside, avoiding the electric leakage problem

3. Anti static body material, prevent the LCD and the flex cable being damaged from the static

4. Easy installation

5. Silicon mat to stick the touch screen without any damaged

6. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series

7. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform.

8. Compatible for LCD or LED screen assembly

Specifications: 

-Main Material: Metal

-Power:600w

-Input: 110V-250V  50/60HZ

-Heating area:295x190MM

-Machine size:360*280*115mm

Use: 

Step 1: Put rubber mat on heating plate.

Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.

Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.

Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the 

glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of 

touch screen.

Step 5: Finally you have finished the separating work, and do a good job.

Note: 

Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories.

All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!

Specification：
Name: Vacuum Screen Separator Machine
Model: TBK – 988
Power supply: AC100-240v
Power: 250w
Weight: 3kg
Size: 15*26*12cm

Use：This machine set can help separate the cell phone’s touch screen from LCD, or touch screen from front glass lens.

Compatible:
For Samsung and other smart mobile phone which LCD screen’s size is 7 inch and below.

Features:
1. Just put on LCD on the heating panel, turn on “Vacuum Pump” switch, then you can separate the glass. And the LCD is firmly fixed on the panel while separating.
2. The shell of vacuum LCD Separator is metal. And it’s better than back light vacuum LCD Separator.
3. The Vacuum LCD separator equip with four bearings. It’s more convenient when separating
4. The surface of heating plate is very smooth. It makes fix broken LCD firmly
5. The LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly.
6. This machine set can help separate the cell phone’s touch screen from LCD, or touch screen from front glass lens.

Package Contents:
1 X Main Unite
1 X 50M Cutting Line
1 X Detach Screen Bar
1 X Power Cord

Packing size: 31*21*18CM
Package weight: 3KG

Product Description：

14 inch LCD Separator Machine with Built-in Vacuum for Mobiles and Tablets

LCD screen separator machine build-in vacuum pump;

Fast, high efficiency and easy operation;

Features:

1. Auto heating metal plate, maximum temperature is 400 centigrade.

2. Easy installation

3. Silicon mat to stick the touch screen without any damaged

4. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series

5. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform

6. Compatible for LCD or LED screen assembly

Specifications:

-Main Material: Metal

-Power:600w

-Input: 110V-250V 50/60HZ

-Heating area:295x190MM

-Machine size:360*280*115mm

Separate LCD front glass screen Built-in vacuum pump Manual LCD separator Suitable for 1~14 inch phone or tablet PC.

Operation Steps:

Step 1: Put rubber mat on heating plate.

Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.

Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.

Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.

Step 5: Finally you have finished the separating work, and do a good job.

Note:

Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories

Specifications:
Name: Vacuum Screen Separator Machine
Model: TBK – 988
Power supply: AC100-240v
Power: 250w
Weight: 3kg
Size: 15*26*12cm
Package Included:
1 X Main Unite
1 X 50M Cutting Line
1 X Detach Screen Bar
1 X Power Cord

Usually the product should take about 6–13 business days to arrive your hand after your payment is confirmed

Description: 
Anti static body material, prevent the LCD and the flex cable being damaged from the static
Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series
2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
Compatible for LCD or LED screen assembly

Parameter 
Power supply: AC110-240V
Power: 250W
Size: 150 * 260 * 120MM
Weight:3.5KG

Application  
Step 1: Put rubber mat on heating plate.
Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.
Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.
Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.
Step 5: Finally you have finished the separating work, and do a good job.

Attention: 
we will send the product to you as soon as possible 
If you have any questions , please feel free to contact us 

Usually the product should take about 6–13 business days to arrive your hand after your payment is confirmed

Description: 
Anti static body material, prevent the LCD and the flex cable being damaged from the static
Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series
2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
Compatible for LCD or LED screen assembly

Parameter 
Power supply: AC110-240V
Power: 250W
Size: 150 * 260 * 120MM
Weight: 3.5KG

Application  
Step 1: Put rubber mat on heating plate.
Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.
Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.
Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.
Step 5: Finally you have finished the separating work, and do a good job.

Attention: 
we will send the product to you as soon as possible 
If you have any questions , please feel free to contact us