Top 10 Phone Screen Vacuum

YH-946A-III Fully Digital LCD Screen Separtor with Built-in Long Lasting Vacuum Pump for Mobile or Ipad
This unit is digitally controlled by a Zilog Dual Core Microcomputer Processor with PID programmable temperature control technology and implantation of the most high-end precision PID program. This gives rapid warming-up, very accurate temperature control, stability, durability and reliability to this unit. It was made by an ISO 9001-2008 Certified Manufacturer with 18 years of Experience of Tools for Soldering.

What’s in the box?

1 x YH-946A-III Screen Seperator Machine
1 x Rubber Mat
1 x Cutting Wire
1 x USA Power Code

Specifications:

• Zilog Dual Core Microcomputer Processor
• Total Power Consumption: 900 Watts
• Temperature range: 122°F ~248°F / 50°C~120°C
• Temperature stability: ±3.6°F(Static state)
• Vacuum pump power: 12W
• Vacuum pressure: 0.05MPa
• Aluminum to ground resistance: <>
• Aluminum size: 280mm*200mm/11.02”x7.87”
• Rubber Mat size: 210mm*160mm/8.27”x6.30”
• Product Dimensions: 360mm*288mm*90mm/14.17”x11.34”x3.54”
• USB Output: 5V 2A
• Working Environment: 32°F ~ 104°F/ 0°C ~ 40°C
• AC 110V/120V – 60 Hz with USA plug

YH-946D-III Fully Digital LCD Screen Separtor
This unit is digitally controlled by a Zilog Dual Core Microcomputer Processor with PID programmable temperature control technology and implantation of the most high-end precision PID program. This gives rapid warming-up, very accurate temperature control, stability, durability and reliability to this unit. It was made by an ISO 9001-2008 Certified Manufacturer with 18 years of Experience of Tools for Soldering.

What’s in the box?

1 x YH-946D-III Screen Seperator Machine
1 x Rubber Mat
1 x USA Power Cord

Specifications:

• Zilog Dual Core Microcomputer Processor
• Total Power Consumption: 370 Watts
• Temperature range: 122°F ~248°F / 50°C~120°C
• Temperature stability: ±3.6°F(Static state)
• Vacuum pump power: 12W
• Vacuum pressure: 0.05MPa
• Aluminum to ground resistance: <>
• Aluminum size: 200mm*110mm/ 7.80″ x 4.30″
• Product Dimensions: 300mm*160mm*90mm/ 11.80″ x 6.30″ x 3.50″
• UV curing lamp power: 12W
• USB Output: 5V 1A
• Working Environment: 32°F ~ 122°F/ 0°C ~ 50°C
• 110V～127V/AC, 60Hz with USA plug
• Product Video Available on Youtube

All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!

Features:
1. Auto heating metal plate, maximum temperature is 400 centigrade.
2. Safety power system inside, avoiding the electric leakage problem
3. Anti static body material, prevent the LCD and the flex cable being damaged from the static
4. Easy installation
5. Silicon mat to stick the touch screen without any damaged
6. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series
7. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
8. Compatible for LCD or LED screen assembly

Specifications:
-Main Material: Metal
-Power:600w
-Input: 110V-250V 50/60HZ
-Heating area:295x190MM
-Machine size:360*280*115mm

Separate LCD front glass screen Built-in vacuum pump Manual LCD separator Suitable for 1~14 inch phone or tablet PC.

Steps:
Step 1: Put rubber mat on heating plate.
Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.
Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.
Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.
Step 5: Finally you have finished the separating work, and do a good job.

Note:
Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories

Description: Build-in air pump vacuum LCD Separator Screen Repair Machine, used for separating glass lens touch screen lcd assembly for cellphone

Specifications:
Main Material: Metal
Color:Black
Working Voltage:AC110V-120V 50/60HZ
Power: 550W
Heating Plate Size:200mm x110mm/7.8*4.3 inches
Device Size: 320x180x120mm / 14.5×5.1×7.1 inches
Item Weight:3.5KG
Compatible: For iPhone, Samsung and other smart mobile phone which LCD screen’s size is 7 inch and below.
Features:
1. Auto heating metal plate, high strength metal technology, sturdy and durable.
2. Safety power system inside, avoiding the electric leakage problem
3. Anti static body material, prevent the LCD and the flex cable being damaged from the static
4. Fast, high efficiency, easy operation and easy installation
5. Silicon mat to stick the touch screen without any damaged
6. LCD screen separator machine build-in vacuum pump
7. Shipment from CA , 1 year warranty , guaranteed ,fast after-sale service
Notes:
1. Must ensure the machine connects ground wire;
2. Do not let air flow blows on the plate directly, or it will affect the heating machine.
3. You are taking some risk of damaging touch screen or LCD. When you are a new repairer, you’d better practice your skill with some damaged LCD assembly.
Package include
1 x LCD Separator Machine
1 x Rubber Mat
1 x Power Cord

Features:

1. Auto heating metal plate, maximum temperature is 400 centigrade.

2. Safety power system inside, avoiding the electric leakage problem

3. Anti static body material, prevent the LCD and the flex cable being damaged from the static

4. Easy installation

5. Silicon mat to stick the touch screen without any damaged

6. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series

7. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform

8. Compatible for LCD or LED screen assembly

Specifications:

-Main Material: Metal

-Power:600w

-Input: 110V-250V 50/60HZ

-Heating area:295x190MM

-Machine size:360*280*115mm

Separate LCD front glass screen Built-in vacuum pump Manual LCD separator Suitable for 1~14 inch phone or tablet PC.

Application:

Step 1: Put rubber mat on heating plate.

Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.

Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.

Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.

Step 5: Finally you have finished the separating work, and do a good job.

Note:

Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories

Features:
1. Auto heating metal plate, maximum temperature is 400 centigrade.
2. Safety power system inside, avoiding the electric leakage problem
3. Anti static body material, prevent the LCD and the flex cable being damaged from the static
4. Easy installation
5. Silicon mat to stick the touch screen without any damaged
6. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series
7. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
8. Compatible for LCD or LED screen assembly
Specifications:
-Main Material: Metal
-Power:600w
-Input: 110V-250V 50/60HZ
-Heating area:295x190MM
-Machine size:360*280*115mm
Separate LCD front glass screen Built-in vacuum pump Manual LCD separator Suitable for 1~14 inch phone or tablet PC.
Application:
Step 1: Put rubber mat on heating plate.
Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.
Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.
Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.
Step 5: Finally you have finished the separating work, and do a good job.
Note:
Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories
Shipped from the United States, quickly arrived through logistics such as UPS/USPS/FEXDE

Product Description

14″ LCD Touch Screen Glass Separator Machine Built-in Vacuum Pump Phone Repair

14 inch LCD Separator Machine with Built-in Vacuum for Mobiles and Tablets

Features:

1. Safety power system inside, avoiding the electric leakage problem

2. Anti static body material, prevent the LCD and the flex cable being damaged from the static

3. Easy installation

4. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series.

5. Compatible for LCD or LED screen assembly

Specifications:

-Main Material: Metal

-Power:600w

-Input: 110V 60HZ

-Heating area:295x190MM

-Machine size:360*280*115mm

Application:

Step 1: Put rubber mat on heating plate.

Step 2: Turn vacuum button (s1/ s2) on, put LCD screen on rubber mat and fix tightly.

Step 3: Turn on the machine and wait for the metal plate become 80-100 degree.

Step 4: Start to separate the LCD off the glass with cutting wire, then right and left movement with wire between the LCD and the glass, please notice that you must using gentle power and keep wire stay on the LCD surface, so that it will avoid the damage of touch screen.

Step 5: Finally you have finished the separating work, and do a good job.

Note:

Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories

Specification:
Power:370w
Temperature range:50-120℃
Display mode:LED display
Temperature stability:±2℃（static state）
Vacuum pump power:12W
Vacuum pressure:0.05MPa
Aluminum to ground resistance:＜2Ω
Aluminum size:200mm(L)x110mm(W)
Overall dimensions:300mmX160mmX90mm
UV curing lamp power:12W
USB output:5V,1A
Opearating temperature:0~40℃/32℉~104℉
Storage temperature:-20℃~80℃、-4℉~176℉
Storage humidity:35%~45%
Model: US 110V / EU 220V
Package included:
1 x LCD Touch Screen Glass Separator
Shipped from the United States, quickly arrived through logistics such as UPS/USPS/FEXDE

Description
14 inch LCD Separator Machine with Built-in Vacuum for Mobiles and Tablets
LCD screen separator machine build-in vacuum pump;
High strength metal technology, sturdy and durable;
Fast, high efficiency and easy operation;
Any smartphone or tablet glass up to 14 inch can be separated from the LCD with no problems;

Features
1. Auto heating metal plate, maximum temperature is 400 centigrade.
2. Safety power system inside, avoiding the electric leakage problem
3. Anti static body material, prevent the LCD and the flex cable being damaged from the static
4. Easy installation
5. Silicon mat to stick the touch screen without any damaged
6. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series
7. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform
8. Compatible for LCD or LED screen assembly

Specifications
-Main Material: Metal
-Power: 600w
-Input: 110V-250V 50/60HZ
-Heating Area: 295x190MM
-Machine Size: 360*280*115mm
Separate LCD front glass screen Built-in vacuum pump Manual LCD separator Suitable for 1~14 inch phone or tablet PC.

Note
Do not produce the heat more than 110 degree when operating; otherwise the high temperature may destroy the phone accessories

Package Includes
1 * LCD Separator Machine