Top 10 Vacuflo Central Vacuum Hose Accessories

The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.

OVO attachment kit with universal 30ft switch control low-voltage crushproof hose and all purpose brushes and accessories: an adjustable metal wand, combo brush, deluxe storage accessory organizer, chrome hose hanger, dusting brush, upholstery brush and crevisse tool. Ideal for all types of hard surfaces.

The 93730 is designed to use your central vacuum system in the garage or work shop for fast effective clean-up. The Cen-Tec exclusive tool set was designed with the unique cleaning requirements associated with detailing cars, boats, and RV’s. The tool set is set at a unique 30 degree angle not the typical 45 degree to relax your wrist and reduce the effort that comes from trying to position the tool at the proper angle for effective cleaning. The nylon fill dusting tool is paint brush soft with extra long fill to reach into the louvers on your car dash, the deep corner when the dash meets the windshield and down into the deep pockets on the door panels. A second dusting tool is ideal for grooming upholstery and open, hard surfaces. The upholstery tool feature can be angled down for gentle cleaning or angled up to engage aggressive teeth for raising matted carpet or releasing stuck on dirt that dries and grabs the carpet surface. The two extension wands a 12” natural fill floor brush extends the use of the 93730 to floors and walls great for capturing cobwebs or saw dust. The 30 foot crush proof commercial grade hose will last for years, even in harsh high use environments. The 93730 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac.

This premium 12 inch wide natural bristle bare surface floor brush is ideal for vacuuming all types of bare surface floors, including marble, hardwood, tile, linoleum, laminate, parquet, and can even clean low pile rugs. The bristles are made from natural horse hair which provides a very soft brush which will not scratch even high gloss floors such as marble. The 90 degree swivel neck makes maneuvering around furniture, or underneath tables incredibly easy. The diameter of the swivel neck measures 1.25″, which will fit nearly every central vacuum system on the market, including; NuTone, Beam, VacuFlo, Hayden, CenTec, Electrolux, Dirt Devil, Hoover, MD Manufacturing, and many others. It also works with many stand alone vacuum cleaners such as Dyson, Hoover, Bissell, Eureka, and all other brands which use a 1.25″ diameter hose or wand. Risk free money back guarantee on size, fit and quality.

The 37737 is a premium nozzle for both hard floor and carpeted surfaces. The tool is virtually silent when moving across hard floor surfaces due to the oversized wheel located just under the double pivot neck. The neck pivots first at the tool and then at the neck base to insure maximum cleaning performance. The 37737 is compatible with all canister vacuums, commercial back pack vacuums using 1.25” accessories, and all major brands of central vacuum including Beam, Electrolux, Vacumaid, Cyclovac, MD, Vacuflo, Canavac, Nutone, Eureka, and Imperium. To confirm the 37737 consider the nozzle end of your wand or extension tube. If it has a connection without a button and measures approximately 1.1/4” on the outside surface, it should be compatible. The 37737 is not compatible with several brands of European vacuums like Miele which require a 1.375” neck.

Cen-Tec’s 94907 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. A 50 Ft. hose with an inner diameter of 1-3/8” ensures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 94907 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.

The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.

The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.