Nowadays, there are so many products of velineon motor 1/10 cooling fan in the market and you are wondering to choose a best one.You have searched for velineon motor 1/10 cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings velineon motor 1/10 cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
995 reviews analysed
1. A1404, 1/4HP 825RPM Condenser Fan Motors
Feature
- 1/4 HP AC Condenser Fan Motor, 1-speed at 825 RPM, 208~230V, 2.2 AMP
- Capacitor (not included): 5 MFD/370V
- 36″ long leads
- Replaces: AOS Century FSE1028SF, Emerson: 1874, MARS 10404, Fasco D934, GE/Genteq 3404, Packard 40825, Rheem Protech 51-23054-13, York Source 1: S1-FHM3204
- Features: All Angle, ball bearing Rheem mounting holes w/screws installed Water slinger on shaft Thru-bolt or band mounting Capacitor requirement noted on motor label Double full flatted shaft Specifications: Class B insulation Single phase, 60 hertz Thermal overload protected Fan duty, continuous, air over Totally enclosed non-ventilated 36 inch leads Reversible rotation
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
2. American Volt 14" Inch Electric Fan 12v Radiator Cooling 90w Motor & Thread-in Thermostat Kit
Feature
- 14″ inch high performance 2500 CFM reversible 12 volt electric cooling fan.
- 3/8″ NPT thread-in probe thermostat complete wiring kit w/ instructions.
- Fan motors are sealed to be water and dust resistant, increasing longevity.
- Configured by default to mount inside the radiator and pull air through.
- Blade and wiring polarity can be reversed to make the fan an air pusher.
Description
Electric Fan:
- 14 inch reversible 12 volt electric cooling fan.
- Powerful 90 watt motor will keep your engine cool.
- Configured as an air puller out of the box.
- Blade and wiring can be reversed to make the fan an air pusher.
- For radiators, oil coolers, transmission coolers, condensers and more.
- Includes mounting feet attachments and tie strap kit.
Blade Size
– 13 Inch Blade Type
– Curved Motor Size
– 90 Watts CFM Rating
– 2000
RPM Rating
Amp Draw
– 2100
– 12 Amps Material
– Plastic Shroud/Steel Motor Dimensions
– 15″ x 14″ x 2.5″ thickness at center x 1.5″ thickness at edge
Thermostat Kit:
- Universal fit for any automotive vehicle.
- Designed to activate up to (2) 12 volt fans.
- 180’F turn-on temperature, 165’F turn-off temperature.
- Water jacket 3/8″ NPT thread-in probe.
- Probe typically threads into radiator, water outlet or manifold.
- Maximum 25 amp continuous draw.
- AC/Manual override circuit.
- Installation instructions.
Kit Includes:
(1) – Thermostat Switch (1) – 3/8” NPT Thread-in Probe (1) – Wiring Harness (1) – 40 Amp Relay (1) – 30 Amp Fuse (1) – Large Ring Terminal (3) – Small Ring Terminals (2) – Butt Connectors (4) – 4” Wire Ties (2) – Female Connectors (4) – Sheet Metal Screws (2) – Wire Tap Connectors
3. Lomanco Power Vent Motor Replacement F0510B2944
4. (2 pack) Engine radiator cooling fan 14-inch curved blade 12V 90W motor, radiator fan with fan mounting kit (push-pull design)
Feature
- The package includes: 2 cooling fans, 2 sets of mounting bracket accessories.
- Maximum outside diameter is 14 inches. The thickness is 2.78 inches. Maximum air volume CFM = 1650CFM. Maximum fan RPM = 2500RPM. 10 S-shaped blades. 12 volts, 7.6AMPD RAW. 90W.
- OE accessories or replacement. Push-pull. Switch the push-pull working mode: only need to replace the power cord and turn the fan blade over to install. When turning the fan blades, apply anti-loosening glue to the fixed nut to prevent the nut from loosening.
- According to the size of the installation location, the cooling fan with the correct size should be selected so that the ideal heat dissipation effect can be achieved.
- This product is a universal product, which can be used to replace the original car parts, enhanced heat dissipation of agricultural machinery, enhanced heat dissipation of equipment, greenhouse ventilation, and attic ventilation. Just need a suitable installation location and matching power supply, it will not let you down.
Description
The electric slim fan is lightweight, has an ultra slim design so the fan can be installed flush against your radiator, or other applications. It comes with the universal fan mounting kit which make it easy to install. The fan can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup
Puller and Pusher Design：
Puller fans mount on the engine side (back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core.
Pusher fans mount on the grille side (front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are used typically where there is a limited amount of space for a properi sized puller fan.
5. 14" Electric Radiator Cooling Fan Assembly Kit 1750 CFM Universal Slim Engine Fan Mounting Kit Reversible 12V 90W （Diameter 13.82" Depth 2.56")
Feature
- Overall Diameter:13.82 INCH,Installation Stand:5.98 INCH, Overall Thickness:2.56 INCH
- 1750 CFM Car Cooling Fans:Amp Draw: 7.5 amp
- Watts:90W
- Blade Length: 13inches
- Number of Blades: 10
- Blade Type: S
- High-quality, lightweight, and durable
- great as replacement or upgrade from factory parts.
- Simple installation, no modifications required.Fan can be used as pusher or puller with the adaptable mounting kit.
- How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!
6. Electric Motors C01575 Replacement Electric Motor Kit with Fan, 120V
Description
Fan Kit is designed to replace most repair projects. 5/8 Coil stack, continuous duty, air over. Kit contains motor, 1 fan = 4.5 (Flat/paddle style). replacement for Broan, nutone, uppco, ventorola e498-1, bay motors, Sears 569
7. 12" High Performance Electric Cooling Fan Push Pull Electric Radiator Slim Fan 12V 80W 1550 CFM with Mounting Kit （Diameter 11.73" Depth 2.56")
Feature
- Overall Diameter:11.73 INCH, Overall Thickness:2.56 INCH
- 1550 CFM Car Cooling Fans:Amp Draw: 12 amp
- Watts:80W
- Blade Length: 11inch
- Number of Blades: 10
- Blade Type: straight
- High-quality, lightweight, and durable
- great as replacement or upgrade from factory parts.
- Simple installation, no modifications required.Fan can be used as pusher or puller with the adaptable mounting kit.
- How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!
8. Aluminum Heat Sink w/Cooling Fan Fits Motor 540 550 3650 (Purple, Set of 1)
Description
Features:
1/10 Car Engine motor heatsink with 5V cooling fan for RC Truck Buggy Crawler
Package Included:
1 x Heatsink
Weight:
Approx.:34g
Kindly Noted:
(1), Due to photography and different display of computers or mobile devices, the color of the commodity may be slightly different from the photos.
(2), Please do not hesitate to contact us if there’s a quality issue, we will try our best to solve it for you.
9. Jrelecs Upgrade Waterproof BL3660 3800KV Brushless Motor with 80A ESC Combo Set for 1/10 RC Car Truck
Feature
- 4 pole 12 slot high-torque motor design 5mm shaft diameter
- High purity copper windings maximizes efficiency
- Precision engineered for maximum energy conversion
- Precision balanced rotor,smoothness for best reliability and maximum RPM
- Mutiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection Bulit-in 5.8V/3A BEC Suit for 1/10 scale RC car
Description
Note:
Please accept our advice:
This 3800KV Combo used 2S Lipo battery.
Please don’t always working. Usually you can play it 15-20 min.
Then let the Motor cool down for a while and continue playing.(about 30Min can cool down)
ESC Specifications:
Continous current: 80A
Burst current: 480A/10sec
Power supply: 2-4S LiPo / 4-12S NiMh
SBEC: 6.1V/3A
Power supply plug: T plug
Motor plug: 4mm banana connector
Cooling system: Cooling fan
Programmable: YES
Size: 50 * 40 * 35mm
Package Information:
Package size: 10.5 * 8 * 6cm / 4.1 * 3.2 * 2.4in
Package weight: 333g / 11.7oz
Gift box package
Package List:
1 * Jrelecs 3660 3800KV Motor
1 * Jrelecs Waterproof 80A Brushless ESC
10. Jrelecs Upgrade Waterproof BL3650 3900KV Brushless Motor with 80A ESC Combo Set for 1/10 RC Car Truck
Feature
- 4 pole 12 slot high-torque motor design 3.175mm shaft diameter
- High purity copper windings maximizes efficiency
- Precision engineered for maximum energy conversion
- Precision balanced rotor,smoothness for best reliability and maximum RPM
- Mutiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection Bulit-in 5.8V/3A BEC Suit for 1/10 scale RC car
Description
Note:
Please accept our advice:
Please don’t always working. Usually you can play it 15-20 min.
Then let the Motor cool down for a while and continue playing.(about 30Min can cool down)
Suitable recommended model：Not Fit The Short Course Racing Truck
Use 2S Battery:
*RC Off-Road
* Flat Running Car
*Truck Car
*Bigfoot Cars
Use3S Battery:
*RC Off-Road
*Flat Running Car
Motor Specifications:
Watts: 900W
Max voltage: <>
Max Amps: 69A
KV(RPM/Volt): 3900KV
Max RPM: 50000
Diameter: 36mm
Length: 50mm
Shaft length: 15mm
Shaft diameter: 3.175mm
Plug type: 4mm golden banana plug
ESC Specifications:
Item name: waterproof ESC
Continous current: 80A
Burst current: 480A/10sec
Power supply: 2-4S LiPo / 4-12S NiMh
SBEC: 6.1V/3A
Power supply plug: T plug
Motor plug: 4mm banana connector
Cooling system: Cooling fan
Programmable: YES
Size: 50 * 40 * 35mm
ESC Specifications:
Continous current: 80A
Burst current: 480A/10sec
package Information:
Package size: 10.5 * 8 * 6cm / 4.1 * 3.2 * 2.4in
Package weight: 293g / 10.3oz
Gift box package
Package List:
1 * Jrelecs 3650 3900KV Motor
1 * Jrelecs Waterproof 80A Brushless ESC
NOTE:Never leave this product unsupervised when it is powered on.
It’s important to select the battery, Not all motor and ESC suitable for 3s lipo, It is better for 2s lipo.
A wrong tooth ratio can cause the motor to overheat. The motor temperature should be lower than 212℉ during the operation.
Temperatures above 212℉ will weaken the magnet and may partly melt the coils and eventually damage the ESC (because of strong current)!!! To avoid potential risks such as ESC/motor damage or malfunction caused by overheat, start with a very small pinion first and check the ESC & motor temperatures regularly throughout the run. This is the only way to prevent overheat!!!!
Conclusion
By our suggestions above, we hope that you can found Velineon Motor 110 Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
