Top 10 Water Cooling Pump 12V 716 Id

Specifications:
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140F
Item dimension: 51mm*34mm*42.7mm
Note:
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Package includes:
1 * Water pump

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 210 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

Specification:
Material: Acrylic + ABS
Model: PU-FS4-J
Rated current: 0.7A
Rated function: 8W
Pump head: 4 meters
Pump flow: 800L/H
Starting voltage: 7V
The highest voltage: 13.5V
No-load speed: 5000RPM
Load speed: 3000RPM
Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in
Weight: about 285 g

Package list:
1 * Water Pump
1 * Rubber Mat

115V, 11,000 cfm, concentric pump, fits mounting bracket in champion coolers grounded plug flame Retardant motor housing auto reset thermal overload, 420 gph low level pump, UL classified, 1 year warranty. The product is manufactured in china. Easy installation and easy handling.

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

Specifications:
Material: PA66+Glass fiber
Power consumption: 54W
Rated voltage: 12V
Rated current: 4.5A
Max flow rate: 22L/MIN (5.8G/MIN)
Max static head: 11.0m (36ft)
Diameter of inlet: 20mm(1/2 inch Thread)
Diameter of outlet: 20mm(1/2 inch Thread)
Noise: Waterproof level: IP68
Lifespan: More than 20,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 100℃/210°F
Item dimension: 93.9mmx99.5mmx69.6mm

Note:
1. Working at rated voltage (DC12V/4.5A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.

How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.

Package includes:
1 * Water pump

Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic type – the pump squishes the silicone tubing that contains the liquid instead of impelling it directly. The upshot? The pump never touches the fluid which makes this an excellent choice for any food/drink/sterile based pumping such as for making drink-bots or gardening robots!
The pump is basically a geared down DC motor, so it has a lot of torque. Inside the pump is a ‘clover’ pattern of rollers. As the motor turns, the clover presses on the tube to press the fluid though. The pump does not need to be primed and in fact can self-prime itself with water a half meter with ease. You can PWM the motor to speed up or slow down the flow rate and if you connect the motor the other way it will move fluid the other direction. Works great with either a power transistor (basic on/off) or a motor driver chip such as the L293D.
The pump comes with 1 meter of silicone tubing and 2 barbed connectors.Please note that the silicone tubing is not sterile and might be dirty on its way to you. Before using, the tubing must be sterilized! The included tubing is also not rated FDA or USDA compliant and is only meant for basic testing of the pump.
TECHNICAL DETAILS
Uses approx 4mm outer diameter, 2mm inner silicone tubing, the pump tube size has changed on us, so please measure the tubing that comes with your pump to verify!
Working Temperature: 0℃ – 40 ℃
Motor voltage: 12VDC
Motor current: 200-300mA
Flow rate: up to 100 mL/min
Weight: 200 grams
Dimensions: 27mm diameter motor, 72mm total length Mounting holes: 2.7mm diameter, 50mm center-to-center distance

Specifications:
Tube material: Transparent silicone tube
Shell material: PC
Rolling wheel: POM
Roller type: Ball bearing
Motor: 12V DC motor
DC motor current: 0.5-1.4A
Flow range: 0-400ml/min
Tube inner diameter: 6.4mm / 0.25inch
Tube outer diameter: 9.6mm / 0.38inch
Wall thickness: 1.6mm / 0.06inch
The maximum diameter: 9.6mm / 0.38inch
Working temperature: 0-40℃
Relative humidity: 80%
Weight: Approx. 273g

Package Included:
1 x High Flow Peristaltic Pump
1 x Hex Key

Note:
Please allow small size error due to manual measurement. Thanks for your understanding.
The pipe is consumable, not for permanent, the service life will be shorter if it is corrosive liquid.

Specifications:
Model: XHC8 computer water cooling pump
Weight: 294g
Size: Approx. 7.8*5*5cm/3.07*1.97*1.97inch
Thread size: G1/4 (2 points) The actual outer diameter is 12.9MM
Material: engineering plastic
Flow rate: 600H/L
Range: 4 meters
Voltage: 12V
Cover surface treatment: polishing

Package List:
1 * Water cooled pump
1 * Accessory kit
2 * BAracket

Note:
1. Please test with the water. It is strictly forbidden to idling without water, which will easily lead to damage to the pump.
2. This pump is strictly prohibited from overpressure (12V). Please make sure that your power supply is suitable before use.