Top 9 Work Sharp Tool Accsories
Nowadays, there are so many products of work sharp tool accsories in the market and you are wondering to choose a best one.You have searched for work sharp tool accsories in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings work sharp tool accsories which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
873 reviews analysed
1. Work Sharp WS3000 Wood Tool Sharpener
- AIR COOLED, DRY SHARPENING SYSTEM – for chisels, plane irons, spoke shaves, carving tools & lathe tools. Routed airflow from the motor and a special heat-sink design to keep your tools from overheating.
- NO JIGS REQUIRED – sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30° and 35° for chisels and plane irons up to 2″ wide. Achieve a perfect 5° micro-bevel for fast re-honing.
- POWERFUL 1/5 HP MOTOR – with 580 RPM speed has routed air flow and a heat sink cooling system to sharpen blades fast without blade damaging heat. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys
- ACCESSORIES AVAILABLE – You can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two disks, you can always have four different grits ready to go (one on each wheel surface), making it easy to move from task to task.
- PROUD TO BE AN AMERICAN COMPANY – Work Sharp is part of Darex, a 4th-generation family owned company in Ashland, Oregon. For over 40 years we have been engineering industry-leading sharpening tools here in the USA.
The WS-3000 is a bench mounted sharpening system for discerning woodworkers and dedicated hobbyists who want sharp, precision wood-cutting tools quickly and easily – without spending a lot time or money setting up countless jigs, the mess of liquid cooling, or the learning curve required to master antiquated sharpening techniques.
From the Manufacturer
The Work Sharp WS3000 is the sharpening and honing solution for the discerning woodworker and heavy hobbyist who want sharp tools quickly and easily. The WS3000 offers 3 ways to sharpen your tools: Top Side with Tool Rest, the Chisel and Plane Iron Port and the Edge-Vision Port. The WS3000 sharpens chisel and plane blades up to 2″ wide to a perfect 20°, 25°, 30° or 35° bevel angle without any set up time! It also allows you to sharpen a perfect 5° micro-bevel for even faster re-honing. The WS3000 also sharpens carving tools, lathe tools, scrapers, putty knives and more! Work Sharp uses a powerful 1/5 hp motor and produces a high torque max wheel speed of 580 RPM. Work Sharp offers an active air cooled sharpening port with routed air flow and heat sink design to quickly and easily sharpen you chisels and flat blades without overheating or damaging the steel. This innovative, patent pending chisel sharpening port also uses a ceramic oxide lapping abrasive to remove the burr while you sharpen, making sharpening even faster! The WS3000 comes with 2 tempered 2 sided glass wheels (150mm) and one slotted Edge-Vision wheel and uses both solid and slotted adhesive backed abrasives so you can quickly and easily change between coarse and fine grits. Work Sharp uses 150mm premium Norton and Micro-Mesh abrasives in grits of P120, P400, P1000 and 3600 for a wide grit selection. This allows you to have 4 grits on your 2 glass wheels (one grit per wheel surface). The innovative Edge-Vision sharpening method allows you to see the cutting edge of tools while you sharpen, making sharpening of carving and lathe tools easier and more precise than ever before! Work Sharp provides slotted abrasives in P80, P400 and P1200 grits so you can coarse grind or hone all using the Edge-Vision method!
2. Work Sharp WSSA0002043 Fine Abrasive Kit
3. Work Sharp WSSA0002012 Knife & Tool Sharpener Replacement Belt Kit (WSKTS & WSKTS-KT)
4. Work Sharp WSSA0002044 Honing Abrasive Kit
- Add to the functionality of your H9945 WorkSharp wood tool sharpener
- For use with WorkSharp WS2000 and WS3000 tool sharpeners
- Includes 1 3600 150-millimeter Micro-Mesh abrasive and 1 6000 150-millimeter Micro-Mesh abrasive
- Add to the functionality of your WorkSharp wood tool sharpener
- For use with WorkSharp WS2000 and WS3000 tool sharpeners
- Kit includes 1-piece 3600 150-millimeter Micro-Mesh abrasive
- Also includes 1-piece 6000 150-millimeter Micro-Mesh abrasive
- Ships at 2.4-ounces
5. Work Sharp WSSA0002005 Coarse Abrasive Kit
This Coarse Abrasive Kit Is For The H9945 Work Sharp 3000 Wood Tool Sharpener., 2 Pieces P80 Psa (Pressure Sensitive Adhesive) Ceramic Wheel , 2 Pieces P120 Psa Ceramic Oxide Abrasive; 150Mm Diameter , 3 Pieces P220 Psa Aluminum Oxide Abrasive; 150Mm Diameter , 2 Pieces P400 Psa Ceramic Oxide Abrasive; 2 In. Square , 650 Maximum Rpm.
From the Manufacturer
Kit contains: P80 x 150mm round (Qty:2), P120 x 150mm round (Qty:2), P220 x 150mm round (Qty:3), and P400 x 2″ square (Qty:2). For use with Work Sharp WS2000 & WS3000 Tool Sharpeners.
6. Brappo Hard Carrying Case for Work Sharp Knife & Tool Sharpener Ken Onion Edition (Black)
- Specially made for working sharp knives and sharpeners and Ken Onion Edition
- it is well-made and provides ultimate protection for storage and transportation!
- Case made of high density EVA. Waterproof, shockproof and dustproof, it can safely and reliably protect your device from accidental impact, any damage or scratch caused by falling, and keep the device in good condition when traveling or outdoors
- Lightweight and sturdy, easy to carry, and with a mesh pocket specially used for other accessories, the smooth and strong zipper is easy to open and close, bringing you a better experience.
- After-sales service: If you are not satisfied, please feel free to contact us. We will solve the problem for you in the first time
- Case sales only (excluding equipment and accessories)
Size: 12.5*7.8*4.7 inches
Material: Eco-friendly nylon + 1680DEVA
The high-quality hard EVA is made of high-density EVA and 1680D materials, which is durable and durable,
and has good waterproof and impact resistance, which can protect your device from scratches or dirt.
Stylish and durable, it can prevent any damage or scratch caused by accidental impact and drop, and ensure that the device is in good condition when indoors or outdoors.
The classic double zipper is convenient and easy to open and close.
Note: Only the box! Does not include equipment
7. Work Sharp WSSA0002001 Leather Hone Kit (WS3000 ONLY)
8. CASEMATIX Travel Case Compatible with Work Sharp Knife & Tool Sharpener Ken Onion Edition – Protective Carrier with Shoulder Strap for Ken Onion Work Sharp, Belts, Attachments and Other Accessories
- ???? IMPACT-RESISTANT HARD SHELL EXTERIOR – While stored in this case your Work Sharp Knife Sharpener Ken Onion Edition and work sharpener accessories will be protected by a durable EVA hard shell outer that offers optimal protection from impacts.
- ???? IMPACT-ASBORBING FOAM BASE – This carrying case features a bottom layer of dense, protective foam to cradle your Workforce knife sharpener. This premium foam layer will keep your Ken Onion Knife Sharpener protected from impacts and dings.
- ???? ROOM FOR SUPPLIES – Travel with spare belts, attachments and more! This case features netted accessory storage for smaller accessories (extra belts, instruction manual, etc.) and main compartment storage for larger items (attachments, other small tools, etc.).
- ???? ALL-IN-ONE TRAVEL CARRY CASE – Transporting your KenOnion Knife Sharpener has never been easier, as this bag features a carry handle and an adjustable, removable shoulder strap. It’s the ultimate Worksharp Ken Onion Knife Sharpener travel case!
- ???? COMPACT SIZING, SPACIOUS INTERIOR – This protective sharpener case features external dimensions 12″ x 9″ x 6″. The bottom accessory compartment’s internal dimensions measure 11″ x 8.75″ x 4″. CASE ONLY – PRODUCT IN PHOTOS FOR REFERENCE ONLY.
9. Work Sharp WSSAKO81112 Blade Grinder Attachment
Other Info: Kit includes blade grinding attachment that quickly installs to KTS-KO base. Five abrasive belts (P120-Extra coarse, X65-coarse, X22-Medium, X4-Fine, and 12000 Extra Fine). Adjustable center distance and angle lever. Reference plate. Bench mounting tab. Hub fastener. 90° grind plate. Boxed. For use with The Ken Onion Edition Work Sharp Knife and Tool Sharpener only. Does not fit the original sharpener.
By our suggestions above, we hope that you can found Work Sharp Tool Accsories for you.Please don’t forget to share your experience by comment in this post. Thank you!